summaryrefslogtreecommitdiff
path: root/src/signal
AgeCommit message (Collapse)AuthorLines
2014-07-18add or1k (OpenRISC 1000) architecture portStefan Kristiansson-0/+22
With the exception of a fenv implementation, the port is fully featured. The port has been tested in or1ksim, the golden reference functional simulator for OpenRISC 1000. It passes all libc-test tests (except the math tests that requires a fenv implementation). The port assumes an or1k implementation that has support for atomic instructions (l.lwa/l.swa). Although it passes all the libc-test tests, the port is still in an experimental state, and has yet experienced very little 'real-world' use.
2014-06-22add __sysv_signal abi-compat alias for the signal functionRich Felker-0/+1
it should be noted that the "real" __sysv_signal, which we do not implement, is semantically different from signal. references to __sysv_signal arise in code built against glibc under certain combinations of feature test macros, and are almost surely unintentional since the legacy sysv signal behavior has fundamental race conditions that cannot be worked around and which make it impossible to use safely.
2014-04-02add __sigsetjmp ABI-compat alias for sigsetjmpRich Felker-1/+28
2014-03-24always initialize thread pointer at program startRich Felker-4/+15
this is the first step in an overhaul aimed at greatly simplifying and optimizing everything dealing with thread-local state. previously, the thread pointer was initialized lazily on first access, or at program startup if stack protector was in use, or at certain random places where inconsistent state could be reached if it were not initialized early. while believed to be fully correct, the logic was fragile and non-obvious. in the first phase of the thread pointer overhaul, support is retained (and in some cases improved) for systems/situation where loading the thread pointer fails, e.g. old kernels. some notes on specific changes: - the confusing use of libc.main_thread as an indicator that the thread pointer is initialized is eliminated in favor of an explicit has_thread_pointer predicate. - sigaction no longer needs to ensure that the thread pointer is initialized before installing a signal handler (this was needed to prevent a situation where the signal handler caused the thread pointer to be initialized and the subsequent sigreturn cleared it again) but it still needs to ensure that implementation-internal thread-related signals are not blocked. - pthread tsd initialization for the main thread is deferred in a new manner to minimize bloat in the static-linked __init_tp code. - pthread_setcancelstate no longer needs special handling for the situation before the thread pointer is initialized. it simply fails on systems that cannot support a thread pointer, which are non-conforming anyway. - pthread_cleanup_push/pop now check for missing thread pointer and nop themselves out in this case, so stdio no longer needs to avoid the cancellable path when the thread pointer is not available. a number of cases remain where certain interfaces may crash if the system does not support a thread pointer. at this point, these should be limited to pthread interfaces, and the number of such cases should be fewer than before.
2014-03-18fix mips sigsetjmp asm to match fixed jmp_buf sizeRich Felker-1/+1
this was missed in the previous commit.
2014-02-27rename superh port to "sh" for consistencyRich Felker-0/+0
linux, gcc, etc. all use "sh" as the name for the superh arch. there was already some inconsistency internally in musl: the dynamic linker was searching for "ld-musl-sh.path" as its path file despite its own name being "ld-musl-superh.so.1". there was some sentiment in both directions as to how to resolve the inconsistency, but overall "sh" was favored.
2014-02-23superh portBobby Bingham-0/+51
2014-02-23x32 port (diff against vanilla x86_64)rofl0r-1/+1
2014-02-23import vanilla x86_64 code as x32rofl0r-0/+22
2014-01-07fix const-correctness in sigandset/sigorset argumentsRich Felker-2/+2
this change is consistent with the corresponding glibc functions and is semantically const-correct. the incorrect argument types without const seem to have been taken from erroneous man pages.
2013-12-13use 0 instead of NULL for null pointer constantsRich Felker-15/+8
and thereby remove otherwise-unnecessary inclusion of stddef.h
2013-12-12include cleanups: remove unused headers and add feature test macrosSzabolcs Nagy-14/+5
2013-09-16fix sigemptyset and sigfillset for mipsRich Felker-1/+10
they were leaving junk in the upper bits.
2013-08-31fix breakage in synccall due to incorrect signal restoration in sigqueueRich Felker-2/+3
commit 07827d1a82fb33262f686eda959857f0d28cd8fa seems to have introduced this issue. sigqueue is called from the synccall core, at which time, even implementation-internal signals are blocked. however, pthread_sigmask removes the implementation-internal signals from the old mask before returning, so that a process which began life with them blocked will not be able to save a signal mask that has them blocked, possibly causing them to become re-blocked later. however, this was causing sigqueue to unblock the implementation-internal signals during synccall, leading to deadlock.
2013-08-10fix _NSIG and SIGRTMAX on mipsRich Felker-1/+3
a mips signal mask contains 128 bits, enough for signals 1 through 128. however, the exit status obtained from the wait-family functions only has room for values up to 127. reportedly signal 128 was causing kernelspace bugs, so it was removed from the kernel recently; even without that issue, however, it was impossible to support it correctly in userspace. at the same time, the bug was masked on musl by SIGRTMAX incorrectly yielding 64 on mips, rather than the "correct" value of 128. now that the _NSIG issue is fixed, SIGRTMAX can be fixed at the same time, exposing the full range of signals for application use. note that the (nonstandardized) libc _NSIG value is actually one greater than the max signal number, and also one greater than the kernel headers' idea of _NSIG. this is the reason for the discrepency with the recent kernel changes. since reducing _NSIG by one brought it down from 129 to 128, rather than from 128 to 127, _NSIG/8, used widely in the musl sources, is unchanged.
2013-08-09change sigset_t functions to restrict to _NSIGRich Felker-5/+5
the idea here is to avoid advertising signals that don't exist and to make these functions safe to call (e.g. from within other parts of the implementation) on fake sigset_t objects which do not have the HURD padding.
2013-08-09optimize posix_spawn to avoid spurious sigaction syscallsRich Felker-5/+16
the trick here is that sigaction can track for us which signals have ever had a signal handler set for them, and only those signals need to be considered for reset. this tracking mask may have false positives, since it is impossible to remove bits from it without race conditions. false negatives are not possible since the mask is updated with atomic operations prior to making the sigaction syscall. implementation-internal signals are set to SIG_IGN rather than SIG_DFL so that a signal raised in the parent (e.g. calling pthread_cancel on the thread executing pthread_spawn) does not have any chance make it to the child, where it would cause spurious termination by signal. this change reduces the minimum/typical number of syscalls in the child from around 70 to 4 (including execve). this should greatly improve the performance of posix_spawn and other interfaces which use it (popen and system). to facilitate these changes, sigismember is also changed to return 0 rather than -1 for invalid signals, and to return the actual status of implementation-internal signals. POSIX allows but does not require an error on invalid signal numbers, and in fact returning an error tends to confuse applications which wrongly assume the return value of sigismember is boolean.
2013-07-30use separate sigaction buffers for old and new dataTimo Teräs-8/+8
in signal() it is needed since __sigaction uses restrict in parameters and sharing the buffer is technically an aliasing error. do the same for the syscall, as at least qemu-user does not handle it properly.
2013-07-24change jmp_buf to share an underlying type and struct tag with sigjmp_bufRich Felker-2/+2
this is necessary to meet the C++ ABI target. alternatives were considered to avoid the size increase for non-sig jmp_buf objects, but they seemed to have worse properties. moreover, the relative size increase is only extreme on x86[_64]; one way of interpreting this is that, if the size increase from this patch makes jmp_buf use too much memory, then the program was already using too much memory when built for non-x86 archs.
2013-07-18fix off-by-one error in checks for implementation-internal signal numbersRich Felker-3/+3
2013-04-26transition to using functions for internal signal blocking/restoringRich Felker-4/+48
there are several reasons for this change. one is getting rid of the repetition of the syscall signature all over the place. another is sharing the constant masks without costly GOT accesses in PIC. the main motivation, however, is accurately representing whether we want to block signals that might be handled by the application, or all signals.
2013-04-26optimize/debloat raiseRich Felker-2/+2
use __syscall rather than syscall when failure is not possible or not to be considered.
2013-04-22fix reversed argument order x86_64 sigsetjmp's call to sigprocmaskRich Felker-2/+2
this caused sigsetjmp not to save the signal mask but instead to clobber it with whatever happened to be in the sigjmb_buf prior to the call.
2013-03-26remove __SYSCALL_SSLEN arch macro in favor of using public _NSIGRich Felker-6/+6
the issue at hand is that many syscalls require as an argument the kernel-ABI size of sigset_t, intended to allow the kernel to switch to a larger sigset_t in the future. previously, each arch was defining this size in syscall_arch.h, which was redundant with the definition of _NSIG in bits/signal.h. as it's used in some not-quite-portable application code as well, _NSIG is much more likely to be recognized and understood immediately by someone reading the code, and it's also shorter and less cluttered. note that _NSIG is actually 65/129, not 64/128, but the division takes care of throwing away the off-by-one part.
2012-12-06fix sigorset/sigandset: _NSIG/8 is the size in bytesrofl0r-2/+2
2012-12-06sigandset/sigorset: do not check for NULL pointers.rofl0r-10/+0
that way it's consistent with existing sig* functions, and saves some code size.
2012-12-06fixup sigandsetrofl0r-2/+2
2012-12-06add sigandset and sigorset (needed for qemu)rofl0r-0/+34
2012-11-23fix powerpc sigsetjmp asm to match the new jmp_buf size/offsetsRich Felker-2/+2
2012-11-19powerpc: handle syscall error in clone.rofl0r-14/+15
sigsetjmp: store temporaries in jmp_buf rather than on stack.
2012-11-18fix powerpc asm not to store data in volatile space below stack pointerRich Felker-8/+8
it's essential to decrement the stack pointer before writing to new stack space, rather than afterwards. otherwise there is a race condition during which asynchronous code (signals) could clobber the data being stored. it may be possible to optimize the code further using stwu, but I wanted to avoid making any changes to the actual stack layout in this commit. further improvements can be made separately if desired.
2012-11-14fix indention with spaces in powerpc asmRich Felker-10/+10
2012-11-14Merge remote-tracking branch 'ppc-port/ppc-squashed'Rich Felker-0/+45
2012-11-13PPC port cleaned up, static linking works well now.rofl0r-25/+45
2012-11-13import preliminary ppc work by rdp.Richard Pennington-0/+25
2012-11-08clean up sloppy nested inclusion from pthread_impl.hRich Felker-0/+1
this mirrors the stdio_impl.h cleanup. one header which is not strictly needed, errno.h, is left in pthread_impl.h, because since pthread functions return their error codes rather than using errno, nearly every single pthread function needs the errno constants. in a few places, rather than bringing in string.h to use memset, the memset was replaced by direct assignment. this seems to generate much better code anyway, and makes many functions which were previously non-leaf functions into leaf functions (possibly eliminating a great deal of bloat on some platforms where non-leaf functions require ugly prologue and/or epilogue).
2012-10-18fix (hopefully; untested) completely broken/incomplete microblaze sigsetjmpRich Felker-3/+12
2012-10-17fix microblaze asm relocations for shared libcRich Felker-2/+2
only @PLT relocations are considered functions for purposes of -Bsymbolic-functions, so always use @PLT. it should not hurt in the static-linked case.
2012-10-11avoid the thread-ptr-init behavior of sigaction when not installing handlerRich Felker-1/+2
this is necessary because posix_spawn calls sigaction after vfork, and if the thread pointer is not already initialized, initializing it in the child corrupts the parent process's state.
2012-09-29microblaze portRich Felker-0/+20
based on initial work by rdp, with heavy modifications. some features including threads are untested because qemu app-level emulation seems to be broken and I do not have a proper system image for testing.
2012-09-06further use of _Noreturn, for non-plain-C functionsRich Felker-1/+1
note that POSIX does not specify these functions as _Noreturn, because POSIX is aligned with C99, not the new C11 standard. when POSIX is eventually updated to C11, it will almost surely give these functions the _Noreturn attribute. for now, the actual _Noreturn keyword is not used anyway when compiling with a c99 compiler, which is what POSIX requires; the GCC __attribute__ is used instead if it's available, however. in a few places, I've added infinite for loops at the end of _Noreturn functions to silence compiler warnings. presumably __buildin_unreachable could achieve the same thing, but it would only work on newer GCCs and would not be portable. the loops should have near-zero code size cost anyway. like the previous _Noreturn commit, this one is based on patches contributed by philomath.
2012-09-06use restrict everywhere it's required by c99 and/or posix 2008Rich Felker-8/+8
to deal with the fact that the public headers may be used with pre-c99 compilers, __restrict is used in place of restrict, and defined appropriately for any supported compiler. we also avoid the form [restrict] since older versions of gcc rejected it due to a bug in the original c99 standard, and instead use the form *restrict.
2012-08-09fix (hopefully) all hard-coded 8's for kernel sigset_t sizeRich Felker-7/+9
some minor changes to how hard-coded sets for thread-related purposes are handled were also needed, since the old object sizes were not necessarily sufficient. things have gotten a bit ugly in this area, and i think a cleanup is in order at some point, but for now the goal is just to get the code working on all supported archs including mips, which was badly broken by linux rejecting syscalls with the wrong sigset_t size.
2012-07-12sigsetjmp asm for mipsRich Felker-0/+27
2012-07-11initial version of mips (o32) port, based on work by Richard Pennington (rdp)Rich Felker-0/+13
basically, this version of the code was obtained by starting with rdp's work from his ellcc source tree, adapting it to musl's build system and coding style, auditing the bits headers for discrepencies with kernel definitions or glibc/LSB ABI or large file issues, fixing up incompatibility with the old binutils from aboriginal linux, and adding some new special cases to deal with the oddities of sigaction and pipe syscall interfaces on mips. at present, minimal test programs work, but some interfaces are broken or missing. threaded programs probably will not link.
2012-07-11remove unused var in new sigaction codeRich Felker-1/+1
2012-07-11changes to kernel sigaction struct handling in preparation for mips portRich Felker-14/+17
2012-07-03jmp_buf overhaul fixing several issuesRich Felker-10/+7
on arm, the location of the saved-signal-mask flag and mask were off by one between sigsetjmp and siglongjmp, causing incorrect behavior restoring the signal mask. this is because the siglongjmp code assumed an extra slot was in the non-sig jmp_buf for the flag, but arm did not have this. now, the extra slot is removed for all archs since it was useless. also, arm eabi requires jmp_buf to have 8-byte alignment. we achieve that using long long as the type rather than with non-portable gcc attribute tags.
2012-07-02fix sigsetjmp on arm (needs asm)Rich Felker-0/+13
no idea why gcc refuses to compile the C code to use a tail call, but it's best to use asm anyway so we don't have to rely on the quality of the compiler's optimizations for correct code.
2012-05-05update license of njk contributed code (x86_64 asm)Rich Felker-1/+1
these changes are based on the following communication via email: "I hereby grant that all of the code I have contributed to musl on or before April 23, 2012 may be licensed under the terms of the following MIT license: Copyright (c) 2011-2012 Nicholas J. Kain Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE."