| Age | Commit message (Collapse) | Author | Lines |
|---|
|
the ppoll function has been accepted as a future part of the standard
as the outcome of Austin Group tracker issue 1263. at some point it
should be exposed unconditionally, but for now, expose it in the
default feature profile.
|
|
the ppoll function has been accepted as a future part of the standard
as the outcome of Austin Group tracker issue 1263. move the source
file to reflect this.
|
|
this function was overlooked during the time64 transition, probably as
a result of not having any time-related types in its application-side
interface. however, for archs that lack the traditional poll syscall
and have only ppoll, it used timespec as part of its interface with
the kernel: the millisecond timeout was converted to a timespec to
pass to SYS_ppoll. this is a type/ABI mismatch on 32-bit archs with
legacy time32 syscalls.
only one supported arch, or1k, is affected. all of the others either
have SYS_poll, or are 64-bit.
rather than using timespec, define a type locally to match what the
kernel expects. the condition (SYS_ppoll_time64 == SYS_ppoll),
comparable to conditions used elsewhere in timespec-handling code,
evaluates true for "natively time64" 32-bit archs including x32,
future riscv32, and all future 32-bit archs (via definitions in
internal syscall.h). otherwise, the arch is either 64-bit or has
syscalls that take the legacy type, and in either case "long" is
correct.
this fix is based on bug report and proposal by Alexey Izbyshev but
with a different approach to the changes to minimize the contextual
knowledge needed for a reader to understand the source file.
|
|
If the (normalized) timeout passed to select exceeds INT_MAX seconds on
an arch with SYS_pselect6_time64 and the kernel is too old to support
time64 syscalls, the timeout is implicitly converted to (32-bit) long on
the fallback path, losing its upper 32 bits and potentially becoming a
small positive value, violating the intended semantics, or even
a negative value, causing the fallback syscall failure. Fix this by
saturating the timeout at INT_MAX as done in other time64 fallback
cases.
|
|
commit 722a1ae3351a03ab25010dbebd492eced664853b inadvertently passed a
copy of {s,us} to the syscall even if the timeout argument tv was
null, thereby causing immediate timeout (polling) in place of
unlimited timeout. only archs using SYS_select were affected.
|
|
major changes are made alongside adding time64 syscall support to
account for issues found during research. select historically accepts
non-normalized (tv_usec not restricted to less than 1000000) timeouts,
and the kernel normalizes them, but the normalization code is buggy
and subject to integer overflows. since normalization is needed anyway
when using SYS_pselect6 or SYS_pselect6_time64 as the backend, simply
do it up-front to eliminate both code path complexity and the
possibility of kernel bugs.
as a side effect, select no longer updates the caller's timeout
timeval with the remaining time. previously, archs that used
SYS_select updated it and archs that used SYS_pselect6 didn't. this
change may turn out to be controversial and may need revisiting, but
in any case the old behavior was not strictly conforming.
POSIX allows modification of the timeout "upon successful completion",
but the Linux syscall modifies it upon unsuccessful completion (EINTR)
as well (and presumably each time the syscall stops and restarts
before it's known whether completion will be successful). it's
possible that this language does not reflect the actual intent of the
standard, since other historical implementations probably behaved like
Linux, but that should be clarified if there's a desire to bring the
old behavior back. regardless, programs that are depending on this are
not correct and are already broken on some archs we support.
|
|
time64 syscall is used only if it's the only one defined for the arch,
or if the requested timeout length does not fit in 32 bits. on current
32-bit archs where time_t is a 32-bit type, this makes it statically
unreachable.
on 64-bit archs, there are only superficial changes to the code after
preprocessing. both before and after these changes, these functions
copied their timeout arguments to avoid letting the kernel clobber the
caller's copies. now, the copying also serves to change the type from
userspace timespec to a pair of longs, which makes a difference only
in the 32-bit fallback case, not on 64-bit.
|
|
libc.h was intended to be a header for access to global libc state and
related interfaces, but ended up included all over the place because
it was the way to get the weak_alias macro. most of the inclusions
removed here are places where weak_alias was needed. a few were
recently introduced for hidden. some go all the way back to when
libc.h defined CANCELPT_BEGIN and _END, and all (wrongly implemented)
cancellation points had to include it.
remaining spurious users are mostly callers of the LOCK/UNLOCK macros
and files that use the LFS64 macro to define the awful *64 aliases.
in a few places, new inclusion of libc.h is added because several
internal headers no longer implicitly include libc.h.
declarations for __lockfile and __unlockfile are moved from libc.h to
stdio_impl.h so that the latter does not need libc.h. putting them in
libc.h made no sense at all, since the macros in stdio_impl.h are
needed to use them correctly anyway.
|
|
such archs are expected to omit definitions of the SYS_* macros for
syscalls their kernels lack from arch/$ARCH/bits/syscall.h. the
preprocessor is then able to select the an appropriate implementation
for affected functions. two basic strategies are used on a
case-by-case basis:
where the old syscalls correspond to deprecated library-level
functions, the deprecated functions have been converted to wrappers
for the modern function, and the modern function has fallback code
(omitted at the preprocessor level on new archs) to make use of the
old syscalls if the new syscall fails with ENOSYS. this also improves
functionality on older kernels and eliminates the incentive to program
with deprecated library-level functions for the sake of compatibility
with older kernels.
in other situations where the old syscalls correspond to library-level
functions which are not deprecated but merely lack some new features,
such as the *at functions, the old syscalls are still used on archs
which support them. this may change at some point in the future if or
when fallback code is added to the new functions to make them usable
(possibly with reduced functionality) on old kernels.
|
|
this only matters on x32 (and perhaps future 32-on-64 abis for other
archs); otherwise the type is long anyway. the cast through uintptr_t
prevents nonsensical "sign extension" of pointers, and follows the
principle that uintptr_t is the canonical integer type to which
pointer conversion is safe.
|
|
the issue at hand is that many syscalls require as an argument the
kernel-ABI size of sigset_t, intended to allow the kernel to switch to
a larger sigset_t in the future. previously, each arch was defining
this size in syscall_arch.h, which was redundant with the definition
of _NSIG in bits/signal.h. as it's used in some not-quite-portable
application code as well, _NSIG is much more likely to be recognized
and understood immediately by someone reading the code, and it's also
shorter and less cluttered.
note that _NSIG is actually 65/129, not 64/128, but the division takes
care of throwing away the off-by-one part.
|
|
to deal with the fact that the public headers may be used with pre-c99
compilers, __restrict is used in place of restrict, and defined
appropriately for any supported compiler. we also avoid the form
[restrict] since older versions of gcc rejected it due to a bug in the
original c99 standard, and instead use the form *restrict.
|
|
some minor changes to how hard-coded sets for thread-related purposes
are handled were also needed, since the old object sizes were not
necessarily sufficient. things have gotten a bit ugly in this area,
and i think a cleanup is in order at some point, but for now the goal
is just to get the code working on all supported archs including mips,
which was badly broken by linux rejecting syscalls with the wrong
sigset_t size.
|
|
this patch improves the correctness, simplicity, and size of
cancellation-related code. modulo any small errors, it should now be
completely conformant, safe, and resource-leak free.
the notion of entering and exiting cancellation-point context has been
completely eliminated and replaced with alternative syscall assembly
code for cancellable syscalls. the assembly is responsible for setting
up execution context information (stack pointer and address of the
syscall instruction) which the cancellation signal handler can use to
determine whether the interrupted code was in a cancellable state.
these changes eliminate race conditions in the previous generation of
cancellation handling code (whereby a cancellation request received
just prior to the syscall would not be processed, leaving the syscall
to block, potentially indefinitely), and remedy an issue where
non-cancellable syscalls made from signal handlers became cancellable
if the signal handler interrupted a cancellation point.
x86_64 asm is untested and may need a second try to get it right.
|
|
this commit addresses two issues:
1. a race condition, whereby a cancellation request occurring after a
syscall returned from kernelspace but before the subsequent
CANCELPT_END would cause cancellable resource-allocating syscalls
(like open) to leak resources.
2. signal handlers invoked while the thread was blocked at a
cancellation point behaved as if asynchronous cancellation mode wer in
effect, resulting in potentially dangerous state corruption if a
cancellation request occurs.
the glibc/nptl implementation of threads shares both of these issues.
with this commit, both are fixed. however, cancellation points
encountered in a signal handler will not be acted upon if the signal
was received while the thread was already at a cancellation point.
they will of course be acted upon after the signal handler returns, so
in real-world usage where signal handlers quickly return, it should
not be a problem. it's possible to solve this problem too by having
sigaction() wrap all signal handlers with a function that uses a
pthread_cleanup handler to catch cancellation, patch up the saved
context, and return into the cancellable function that will catch and
act upon the cancellation. however that would be a lot of complexity
for minimal if any benefit...
|
|
|
|
|
|
|
