| Age | Commit message (Collapse) | Author | Lines |
|---|
|
this functions is glue for linking dependency logic.
|
|
logically these belong to the intersection of the stdio and pthread
subsystems, and either place the declarations could go (stdio_impl.h
or pthread_impl.h) requires a forward declaration for one of the
argument types.
|
|
policy is that all public functions which have a public declaration
should be defined in a context where that public declaration is
visible, to avoid preventable type mismatches.
an audit performed using GCC's -Wmissing-declarations turned up the
violations corrected here. in some cases the public header had not
been included; in others, a feature test macro needed to make the
declaration visible had been omitted.
in the case of gethostent and getnetent, the omission seems to have
been intentional, as a hack to admit a single stub definition for both
functions. this kind of hack is no longer acceptable; it's UB and
would not fly with LTO or advanced toolchains. the hack is undone to
make exposure of the declarations possible.
|
|
this requirement is specified by POSIX.
|
|
if no output is produced, no underlying fwrite will ever be called,
but byte-oriented printf functions are still required to set the
orientation of the stream to byte-oriented. call __towrite explicitly
if the FILE is not already in write mode.
|
|
commit b5a8b28915aad17b6f49ccacd6d3fef3890844d1 setup the write buffer
bound pointers for the temporary buffer manually to fix a buffer
overflow issue, but in doing so, caused vfprintf on unbuffered files
never to call __towrite, thereby failing to set the stream orientation
to byte-oriented, failing to clear any prior read mode, and failing to
produce an error when the stream is not writable.
revert the inline setup of the bounds pointers and instead zero them,
so that the underlying fwrite code will call __towrite to set them up.
|
|
commit 0b80a7b0404b6e49b0b724e3e3fe0ed5af3b08ef added the ability to
set application-provided stdio FILE buffers, adding the possibility
that stderr might be buffered at exit time, but __stdio_exit did not
have code to flush it.
this regression was not present in any release.
|
|
|
|
fundamentally there is no good reason these functions need to set an
orientation (morally it should be possible to write a wchar_t[] memory
stream using byte functions, or a char[] memory stream using wide
functions), but it's a part of the specification that they do. aside
from being able to inspect the orientation with fwide, failure to set
the orientation in open_wmemstream is observable if the locale changes
between open_wmemstream and the first operation on the stream; this is
because the encoding rule (locale) for the stream is required to be
bound at the time the stream becomes wide-oriented.
for open_wmemstream, call fwide to avoid duplicating the logic for
binding the encoding rule. for open_memstream it suffices just to set
the mode field in the FILE struct.
|
|
the w+ mode is specified to "truncate the buffer contents". like most
of fmemopen, exactly what this means is underspecified. mode w and w+
of course implicitly 'truncate' the buffer if a write from the initial
position is flushed, so in order for this part of the text about w+
not to be spurious, it should be interpreted as requiring something
else, and the obvious reasonable interpretation is that the truncation
is immediately visible if you attempt to read from the stream or the
buffer before writing/flushing.
this interpretation agrees with reported conformance test failures.
|
|
this is a POSIX requirement.
also remove the gratuitous locking shenanigans and simply access f->fd
under control of the lock. there is no advantage to not doing so, and
it made the correctness non-obvious at best.
|
|
the code to perform rounding to the desired precision wrongly assumed
the long double mantissa was an integral number of nibbles (hex
digits) in length. this is true for 80-bit extended precision (64-bit
mantissa) but not for double (53) or quad (113).
scale the rounding value by 1<<(LDBL_MANT_DIG%4) to compensate.
|
|
commit 0b80a7b0404b6e49b0b724e3e3fe0ed5af3b08ef, which added non-stub
setvbuf, applied the UNGET pushback adjustment to the size of the
buffer passed in, but inadvertently omitted offsetting the start by
the same amount, thereby allowing unget to clobber up to 8 bytes
before the start of the buffer. this bug was introduced in the present
release cycle; no releases are affected.
|
|
|
|
|
|
bring these functions up to date with the current idioms we use/prefer
in fmemopen and fopencookie.
|
|
rather than manually performing pointer arithmetic to carve multiple
objects out of one allocation, use a containing struct that
encompasses them all.
|
|
assign entire struct rather than member-at-a-time. don't repeat buffer
sizes; always use sizeof to ensure consistency.
|
|
|
|
instead of using a waiters count, add a bit to the lock field
indicating that the lock may have waiters. threads which obtain the
lock after contending for it will perform a potentially-spurious wake
when they release the lock.
|
|
add a member of appropriate type to the fpos_t union so that accesses
are well-defined. use long long instead of off_t since off_t is not
always exposed in stdio.h and there's no namespace-clean alias for it.
access is still performed using pointer casts rather than by naming
the union member as a matter of style; to the extent possible, the
naming of fields in opaque types defined in the public headers is not
treated as an API contract with the implementation. access via the
pointer cast is valid as long as the union has a member of matching
type.
|
|
this is the idiom that's used elsewhere and should be more efficient
or at least no worse.
|
|
|
|
|
|
they seem to be relics of e3cd6c5c265cd481db6e0c5b529855d99f0bda30
where this code was refactored from a check that previously masked
against (F_ERR|F_NOWR) instead of just F_NOWR.
|
|
formally, calling readv with a zero-length first iov component should
behave identically to calling read on just the second component, but
presence of a zero-length iov component has triggered bugs in some
kernels and performs significantly worse than a simple read on some
file types.
|
|
the stdio FILE read backend's return type is size_t, not ssize_t, and
all of the special (non-fd-backed) FILE types already return the
number of bytes read (zero) on error or eof. only __stdio_read leaked
a syscall error return into its return value.
fread had a workaround for this behavior going all the way back to the
original check-in. remove the workaround since it's no longer needed.
|
|
replace with simple conditional that doesn't rely on assumption that
cnt is either 0 or -1.
|
|
when a null buffer pointer is passed to fmemopen, requesting it
allocate its own memory buffer, extremely large size arguments near
SIZE_MAX could overflow and result in underallocation. this results
from omission of the size of the cookie structure in the overflow
check but inclusion of it in the calloc call.
instead of accounting for individual small contributions to the total
allocation size needed, simply reject sizes larger than PTRDIFF_MAX,
which will necessarily fail anyway. then adding arbitrary fixed-size
structures is safe without matching up the expressions in the
comparison and the allocation.
|
|
commit 78897b0dc00b7cd5c29af5e0b7eebf2396d8dce0 wrongly simplified
Dmitry Levin's original submitted patch fixing alt-form octal with the
zero flag and field width present, omitting the special case where the
value is zero. as a result, printf("%#o",0) wrongly prints "00" rather
than "0".
the logic prior to this commit was actually better, in that it was
aligned with how the alt-form flag (#) for printf is specified ("it
shall increase the precision"). at the time there was no good way to
avoid the zero flag issue with the old logic, but commit
167dfe9672c116b315e72e57a55c7769f180dffa added tracking of whether an
explicit precision was provided.
revert commit 78897b0dc00b7cd5c29af5e0b7eebf2396d8dce0 and switch to
using the explicit precision indicator for suppressing the zero flag.
|
|
In all cases this is just a change from two volatile int to one.
|
|
notes added by maintainer:
this function is a GNU extension. it was chosen over the similar BSD
function funopen because the latter depends on fpos_t being an
arithmetic type as part of its public API, conflicting with our
definition of fpos_t and with the intent that it be an opaque type. it
was accepted for inclusion because, despite not being widely used, it
is usually very difficult to extricate software using it from the
dependency on it.
calling pattern for the read and write callbacks is not likely to
match glibc or other implementations, but should work with any
reasonable callbacks. in particular the read function is never called
without at least one byte being needed to satisfy its caller, so that
spurious blocking is not introduced.
contracts for what callbacks called from inside libc/stdio can do are
always complicated, and at some point still need to be specified
explicitly. at the very least, the callbacks must return or block
indefinitely (they cannot perform nonlocal exits) and they should not
make calls to stdio using their own FILE as an argument.
|
|
previously, fgetwc left all but the first byte of an illegal sequence
unread (available for subsequent calls) when reading out of the FILE
buffer, but dropped all bytes contibuting to the error when falling
back to reading a byte at a time. neither behavior was ideal. in the
buffered case, each malformed character produced one error per byte,
rather than one per character. in the unbuffered case, consuming the
last byte that caused the transition from "incomplete" to "invalid"
state potentially dropped (and produced additional spurious encoding
errors for) the next valid character.
to handle both cases uniformly without duplicate code, revise the
buffered case to only cover situations where a complete and valid
character is present in the buffer, and fall back to byte-at-a-time
for all other cases. this allows using mbtowc (stateless) instead of
mbrtowc, which may slightly improve performance too.
when an encoding error has been hit in the byte-at-a-time case, leave
the final byte that produced the error unread (via ungetc) except in
the case of single-byte errors (for UTF-8, bytes c0, c1, f5-ff, and
continuation bytes with no lead byte). single-byte errors are fully
consumed so as not to leave the caller in an infinite loop repeating
the same error.
none of these changes are distinguished from a conformance standpoint,
since the file position is unspecified after encoding errors. they are
intended merely as QoI/consistency improvements.
|
|
fgetwc does not set the stream's error indicator on encoding errors,
making ferror insufficient to distinguish between error and eof
conditions. feof is also insufficient, since it will return true if
the file ended with a partial character encoding error.
whether fgetwc should be setting the error indicator itself is a
question with conflicting answers. the POSIX text for the function
states it as a requirement, but the ISO C text seems to require that
it not. this may be revisited in the future based on the outcome of
Austin Group issue #1170.
|
|
Update the buffer position according to the bytes consumed into st when
decoding an incomplete character at the end of the buffer.
|
|
this is mandated by C and POSIX standards and is in accordance with
glibc behavior.
|
|
commit c002668eb0352e619ea7064e4940b397b4a6e68d inadvertently moved
the check for unflushed write buffer outside of the scope of the
existing lock.
|
|
The switch statement has no 'default:' case and the function ends
immediately following the switch, so the extra comparison did not
communicate any extra information to the compiler.
|
|
commit 58e2396a9aa23c132faf4198ca4d779c84955b38 missed that the same
code was duplicated in implementation of vfwprintf.
|
|
the code being removed was written to optimize for size assuming the
compiler cannot collapse code paths for different types with the same
underlying representation. modern compilers sometimes succeed in
making this optimization themselves, but either way it's a small size
difference and not worth the source-level complexity or the UB
involved in this hack.
some incorrect use of va_arg still remains, particularly use of void *
where the actual argument has a different pointer type. fixing this
requires some actual code additions, rather than just removing cruft,
so I'm leaving it to be done later as a separate commit.
|
|
|
|
the swprintf write callback never reset its buffer pointers, so after
its 256-byte buffer filled up, it would keep repeating those bytes
over and over in the output until the destination buffer filled up. it
also failed to set the error indicator for the stream on EILSEQ,
potentially allowing output to continue after the error.
|
|
the old snprintf design setup the FILE buffer pointers to point
directly into the destination buffer; if n was actually larger than
the buffer size, the pointer arithmetic to compute the buffer end
pointer was undefined. this affected sprintf, which is implemented in
terms of snprintf, as well as some unusual but valid direct uses of
snprintf.
instead, setup the FILE as unbuffered and have its write function
memcpy to the destination. the printf core sets up its own temporary
buffer for unbuffered streams.
|
|
in nearest rounding mode exact halfway cases were not following the
round to even rule if the rounding happened at a base 1000000000 digit
boundary of the internal representation and the previous digit was odd.
e.g. printf("%.0f", 1.5) printed 1 instead of 2.
|
|
this patch fixes a large number of missed internal signed-overflow
checks and errors in determining when the return value (output length)
would exceed INT_MAX, which should result in EOVERFLOW. some of the
issues fixed were reported by Alexander Cherepanov; others were found
in subsequent review of the code.
aside from the signed overflows being undefined behavior, the
following specific bugs were found to exist in practice:
- overflows computing length of floating point formats with huge
explicit precisions, integer formats with prefix characters and huge
explicit precisions, or string arguments or format strings longer
than INT_MAX, resulted in wrong return value and wrong %n results.
- literal width and precision values outside the range of int were
misinterpreted, yielding wrong behavior in at least one well-defined
case: string formats with precision greater than INT_MAX were
sometimes truncated.
- in cases where EOVERFLOW is produced, incorrect values could be
written for %n specifiers past the point of exceeding INT_MAX.
in addition to fixing these bugs, we now stop producing output
immediately when output length would exceed INT_MAX, rather than
continuing and returning an error only at the end.
|
|
if the requested precision is close to INT_MAX, adding
LDBL_MANT_DIG/3+8 overflows. in practice the resulting undefined
behavior manifests as a large negative result, which is then used to
compute the new end pointer (z) with a wildly out-of-bounds value
(more overflow, more undefined behavior). the end result is at least
incorrect output and character count (return value); worse things do
not seem to happen, but detailed analysis has not been done.
this patch fixes the overflow by performing the intermediate
computation as unsigned; after division by 9, the final result
necessarily fits in int.
|
|
previously, fflush_unlocked was an alias for an internal backend that
was called by fflush, either for its argument or in a loop for each
file if a null pointer was passed. since the logic for the latter was
in the main fflush function, fflush_unlocked crashed when passed a
null pointer, rather than flushing all open files. since
fflush_unlocked is not a standard function and has no specification,
it's not clear whether it should be expected to accept null pointers
like fflush does, but a reasonable argument could be made that it
should.
this patch eliminates the helper function, simplifying fflush, and
makes fflush_unlocked an alias for fflush, which is valid because the
two functions agree in their behavior in all cases where their
behavior is defined (the unlocked version has undefined behavior if
another thread could hold locks).
|
|
commit b91cdbe2bc8b626aa04dc6e3e84345accf34e4b1, in fixing another
issue, changed the logic for how alt-form octal adds the leading zero
to adjust the precision rather than using a prefix character. this
wrongly suppressed the zero flag by mimicing an explicit precision
given by the format string. switch back to using a prefix character.
based on bug report and patch by Dmitry V. Levin, but simplified.
|
|
commit 7e816a6487932cbb3cb71d94b609e50e81f4e5bf (version 1.1.11
release cycle) moved the code that performs wchar_t to multibyte
conversion across code that used the resulting length in bytes,
thereby breaking the unget buffer space check in ungetwc and
clobbering up to three bytes below the start of the buffer.
for allocated FILEs (all read-enabled FILEs except stdin), the
underflow clobbers at most the FILE-specific locale pointer. no stores
are performed through this pointer, but subsequent loads may result in
a crash or mismatching encoding rule (UTF-8 multibyte vs byte-based).
for stdin, the buffer lies in .bss and the underflow may clobber
another object. in practice, for libc.so the adjacent object seems to
be stderr's buffer, which is completely unused, but this could vary
with linking options, or when static linking.
applications which do not attempt to use more than one character of
ungetwc pushback, or which do not use ungetwc, are not affected.
|
|
the comparison f->wpos > f->buf has undefined behavior when f->wpos is
a null pointer, despite the intuition (and actual compiler behavior,
for all known compilers) being that NULL > ptr is false for all valid
pointers ptr.
the purpose of the comparison is to determine if the write buffer is
non-empty, and the idiom used elsewhere for that is comparison against
f->wbase, which is either a null pointer when not writing, or equal to
f->buf when writing. in the former case, both f->wpos and f->wbase are
null; in the latter they are both non-null and point into the same
array.
|
