summaryrefslogtreecommitdiff
path: root/src/internal
AgeCommit message (Collapse)AuthorLines
2016-08-11fix pread/pwrite syscall calling convention on shRich Felker-0/+4
despite sh not generally using register-pair alignment for 64-bit syscall arguments, there are arch-specific versions of the syscall entry points for pread and pwrite which include a dummy argument for alignment before the 64-bit offset argument.
2016-05-08add powerpc64 portBobby Bingham-0/+17
2016-04-18add mips n32 port (ILP32 ABI for mips64)Rich Felker-0/+19
based on patch submitted by Jaydeep Patil, with minor changes.
2016-03-06add mips64 portRich Felker-0/+19
patch by Mahesh Bodapati and Jaydeep Patil of Imagination Technologies.
2016-03-06generalize mips-specific reloc code not to hard-code sym/type encodingRich Felker-0/+2
this change is made in preparation for adding the mips64 port, which needs a 64-bit (and mips64-specific) form of the R_INFO macro, but it's a better abstraction anyway. based on part of the mips64 port patch by Mahesh Bodapati and Jaydeep Patil of Imagination Technologies.
2016-02-23allow implementing a_cas_p with pointer-sized ll/scBobby Bingham-0/+18
No current ports do this, but it will be useful for porting to 64-bit ll/sc architectures, such as mips64 and powerpc64.
2016-02-10fix line-buffered flush omission for odd usage of putc-family functionsRich Felker-1/+2
as specified, the int argument providing the character to write is converted to type unsigned char. for the actual write to buffer, conversion happened implicitly via the assignment operator; however, the logic to check whether the argument was a newline used the original int value. thus usage such as putchar('\n'+0x100) failed to produce a flush.
2016-01-30ldso: fix GDB dynamic linker info on MIPSFelix Fietkau-0/+4
GDB is looking for a pointer to the ldso debug info in the data of the ..rld_map section. Signed-off-by: Felix Fietkau <nbd@openwrt.org>
2016-01-26change the internal socketcall selection logicSzabolcs Nagy-1/+1
only use SYS_socketcall if SYSCALL_USE_SOCKETCALL is defined internally, otherwise use direct syscalls. this commit does not change the current behaviour, it is preparation for adding direct syscall numbers for i386.
2016-01-22move sh port's __shcall internal function from arch/sh/src to src treeRich Felker-0/+5
2016-01-21refactor internal atomic.hRich Felker-0/+275
rather than having each arch provide its own atomic.h, there is a new shared atomic.h in src/internal which pulls arch-specific definitions from arc/$(ARCH)/atomic_arch.h. the latter can be extremely minimal, defining only a_cas or new ll/sc type primitives which the shared atomic.h will use to construct everything else. this commit avoids making heavy changes to the individual archs' atomic implementations. definitions which are identical or near-identical to what the new shared atomic.h would produce have been removed, but otherwise the changes made are just hooking up the arch-specific files to the new infrastructure. major changes to take advantage of the new system will come in subsequent commits.
2016-01-20exclude vis.h when compiling assembly filesKhem Raj-1/+1
otherwise C declarations are included into preprocessed (.S) asm source files, producing errors from the assembler.
2015-11-19remove undef weak refs to init/fini array symbols in libc.soRich Felker-6/+1
commit ad1cd43a86645ba2d4f7c8747240452a349d6bc1 eliminated preprocessor-level omission of references to the init/fini array symbols from object files going into libc.so. the references are weak, and the intent was that the linker would resolve them to zero in libc.so, but instead it leaves undefined references that could be satisfied at runtime. normally these references would be harmless, since the code using them does not even get executed, but some older binutils versions produce a linking error: when linking a program against libc.so, ld first tries to use the hidden init/fini array symbols produced by the linker script to satisfy the references in libc.so, then produces an error because the definitions are hidden. ideally ld would have already provided definitions of these symbols when linking libc.so, but the linker script for -shared omits them. to avoid this situation, the dynamic linker now provides its own dummy definitions of the init/fini array symbols for libc.so. since they are hidden, everything binds at ld time and no references remain in the dynamic symbol table. with modern binutils and --gc-sections, both the dummy empty array objects and the code referencing them get dropped at link time, anyway. the _init and _fini symbols are also switched back to using weak definitions rather than weak references since the latter behave somewhat problematically in general, and the weak definition approach was known to work well.
2015-11-12remove use of SHARED macro in dynamic linker version reportingRich Felker-4/+1
also fix visibility of the glue function used.
2015-11-12unify static and dynamic linked implementations of thread-local storageRich Felker-1/+8
this both allows removal of some of the main remaining uses of the SHARED macro and clears one obstacle to static-linked dlopen support, which may be added at some point in the future. specialized single-TLS-module versions of __copy_tls and __reset_tls are removed and replaced with code adapted from their dynamic-linked versions, capable of operating on a whole chain of TLS modules, and use of the dynamic linker's DSO chain (which contains large struct dso objects) by these functions is replaced with a new chain of struct tls_module objects containing only the information needed for implementing TLS. this may also yield some performance benefit initializing TLS for a new thread when a large number of modules without TLS have been loaded, since since there is no need to walk structures for modules without TLS.
2015-11-11eliminate use of SHARED macro to suppress visibility attributesRich Felker-14/+4
this is the first and simplest stage of removal of the SHARED macro, which will eventually allow libc.a and libc.so to be produced from the same object files. the original motivation for these #ifdefs which are now being removed was to allow building a static-only libc using a compiler that does not support visibility. however, SHARED was the wrong condition to test for this anyway; various assembly-language sources refer to hidden symbols and declare them with the .hidden directive, making it wrong to define the referenced symbols as non-hidden. if there is a need in the future to build libc using compilers that lack visibility, support could be moved to the build system or perhaps the __PIC__ macro could be checked instead of SHARED.
2015-11-11fix dynamic loader library mapping for nommu systemsRich Felker-0/+4
on linux/nommu, non-writable private mappings of files may actually use memory shared with other processes or the fs cache. the old nommu loader code (used when mmap with MAP_FIXED fails) simply wrote over top of the original file mapping, possibly clobbering this shared memory. no such breakage was observed in practice, but it should have been possible. the new code starts by mapping anonymous writable memory on archs that might support nommu, then maps load segments over top of it, falling back to read if MAP_FIXED fails. we use an anonymous map rather than a writable file map to avoid reading more data from disk than needed. since pages cannot be loaded lazily on fault, in case of large data/bss, mapping the full file may read a lot of data that will subsequently be thrown away when processing additional LOAD segments. as a result, we cannot skip the first LOAD segment when operating in this mode. these changes affect only non-FDPIC nommu support.
2015-11-10explicitly assemble all arm asm sources as UALRich Felker-0/+1
these files are all accepted as legacy arm syntax when producing arm code, but legacy syntax cannot be used for producing thumb2 with access to the full ISA. even after switching to UAL, some asm source files contain instructions which are not valid in thumb mode, so these will need to be addressed separately.
2015-11-09remove non-working pre-armv4t support from arm asmRich Felker-2/+0
the idea of the three-instruction sequence being removed was to be able to return to thumb code when used on armv4t+ from a thumb caller, but also to be able to run on armv4 without the bx instruction available (in which case the low bit of lr would always be 0). however, without compiler support for generating such a sequence from C code, which does not exist and which there is unlikely to be interest in implementing, there is little point in having it in the asm, and it would likely be easier to add pre-armv4t support via enhanced linker handling of R_ARM_V4BX than at the compiler level. removing this code simplifies adding support for building libc in thumb2-only form (for cortex-m).
2015-09-29eliminate protected-visibility data in libc.so with vis.h preincludeRich Felker-0/+3
some newer binutils versions print scary warnings about protected data because most gcc versions fail to produce the right address references/relocations for such data that might be subject to copy relocations. originally vis.h explicitly assigned default visibility to all public data symbols to avoid this issue, but commit b8dda24fe1caa901a99580f7a52defb95aedb67c removed this treatment for stdin/out/err to work around a gcc 3.x bug, and since they don't actually need it (because taking their addresses is not valid C). instead, a check for the gcc 3.x bug is added to the configure check for vis.h preinclude support; this feature will simply be disabled when using a buggy version of gcc.
2015-09-23fix signal return for sh/fdpicRich Felker-0/+2
the restorer function pointer provided in the kernel sigaction structure is interpreted by the kernel as a raw code address, not a function descriptor. this commit moves the declarations of the __restore and __restore_rt symbols to ksigaction.h so that arch versions of the file can override them, and introduces a version for sh which declares them as objects rather than functions. an alternate solution would have been defining SA_RESTORER to 0 so that the functions are not used, but this both requires executable stack (since the sh kernel does not have a vdso page with permanent restorer functions) and crashes on qemu user-level emulation.
2015-09-22add real fdpic loading of shared librariesRich Felker-0/+4
previously, the normal ELF library loading code was used even for fdpic, so only the kernel-loaded dynamic linker and main app could benefit from separate placement of segments and shared text.
2015-09-22add general fdpic support in dynamic linker and arch support for shRich Felker-3/+14
at this point not all functionality is complete. the dynamic linker itself, and main app if it is also loaded by the kernel, take advantage of fdpic and do not need constant displacement between segments, but additional libraries loaded by the dynamic linker follow normal ELF semantics for mapping still. this fully works, but does not admit shared text on nommu. in terms of actual functional correctness, dlsym's results are presently incorrect for function symbols, RTLD_NEXT fails to identify the caller correctly, and dladdr fails almost entirely. with the dynamic linker entry point working, support for static pie is automatically included, but linking the main application as ET_DYN (pie) probably does not make sense for fdpic anyway. ET_EXEC is equally relocatable but more efficient at representing relocations.
2015-09-17add fdpic structs and reloc types for dynamic linkingRich Felker-0/+16
2015-09-12provide arch-generic fdpic self-relocation code for crt1 to useRich Felker-0/+28
this file is intended to be included by crt_arch.h on fdpic-based targets and needs to be called from the entry point asm.
2015-06-25fix local-dynamic model TLS on mips and powerpcRich Felker-0/+4
the TLS ABI spec for mips, powerpc, and some other (presently unsupported) RISC archs has the return value of __tls_get_addr offset by +0x8000 and the result of DTPOFF relocations offset by -0x8000. I had previously assumed this part of the ABI was actually just an implementation detail, since the adjustments cancel out. however, when the local dynamic model is used for accessing TLS that's known to be in the same DSO, either of the following may happen: 1. the -0x8000 offset may already be applied to the argument structure passed to __tls_get_addr at ld time, without any opportunity for runtime relocations. 2. __tls_get_addr may be used with a zero offset argument to obtain a base address for the module's TLS, to which the caller then applies immediate offsets for individual objects accessed using the local dynamic model. since the immediate offsets have the -0x8000 adjustment applied to them, the base address they use needs to include the +0x8000 offset. it would be possible, but more complex, to store the pointers in the dtv[] array with the +0x8000 offset pre-applied, to avoid the runtime cost of adding 0x8000 on each call to __tls_get_addr. this change could be made later if measurements show that it would help.
2015-06-16switch to using trap number 31 for syscalls on shRich Felker-1/+1
nominally the low bits of the trap number on sh are the number of syscall arguments, but they have never been used by the kernel, and some code making syscalls does not even know the number of arguments and needs to pass an arbitrary high number anyway. sh3/sh4 traditionally used the trap range 16-31 for syscalls, but part of this range overlapped with hardware exceptions/interrupts on sh2 hardware, so an incompatible range 32-47 was chosen for sh2. using trap number 31 everywhere, since it's in the existing sh3/sh4 range and does not conflict with sh2 hardware, is a proposed unification of the kernel syscall convention that will allow binaries to be shared between sh2 and sh3/sh4. if this is not accepted into the kernel, we can refit the sh2 target with runtime selection mechanisms for the trap number, but doing so would be invasive and would entail non-trivial overhead.
2015-06-16refactor stdio open file list handling, move it out of global libc structRich Felker-4/+3
functions which open in-memory FILE stream variants all shared a tail with __fdopen, adding the FILE structure to stdio's open file list. replacing this common tail with a function call reduces code size and duplication of logic. the list is also partially encapsulated now. function signatures were chosen to facilitate tail call optimization and reduce the need for additional accessor functions. with these changes, static linked programs that do not use stdio no longer have an open file list at all.
2015-06-16byte-based C locale, phase 3: make MB_CUR_MAX variable to activate codeRich Felker-0/+3
this patch activates the new byte-based C locale (high bytes treated as abstract code unit "characters" rather than decoded as multibyte characters) by making the value of MB_CUR_MAX depend on the active locale. for the C locale, the LC_CTYPE category pointer is null, yielding a value of 1. all other locales yield a value of 4.
2015-06-16byte-based C locale, phase 2: stdio and iconv (multibyte callers)Rich Felker-0/+1
this patch adjusts libc components which use the multibyte functions internally, and which depend on them operating in a particular encoding, to make the appropriate locale changes before calling them and restore the calling thread's locale afterwards. activating the byte-based C locale without these changes would cause regressions in stdio and iconv. in the case of iconv, the current implementation was simply using the multibyte functions as UTF-8 conversions. setting a multibyte UTF-8 locale for the duration of the iconv operation allows the code to continue working. in the case of stdio, POSIX requires that FILE streams have an encoding rule bound at the time of setting wide orientation. as long as all locales, including the C locale, used the same encoding, treating high bytes as UTF-8, there was no need to store an encoding rule as part of the stream's state. a new locale field in the FILE structure points to the locale that should be made active during fgetwc/fputwc/ungetwc on the stream. it cannot point to the locale active at the time the stream becomes oriented, because this locale could be mutable (the global locale) or could be destroyed (locale_t objects produced by newlocale) before the stream is closed. instead, a pointer to the static C or C.UTF-8 locale object added in commit commit aeeac9ca5490d7d90fe061ab72da446c01ddf746 is used. this is valid since categories other than LC_CTYPE will not affect these functions.
2015-06-07add multiple inclusion guard to locale_impl.hRich Felker-0/+5
2015-06-07remove redefinition of MB_CUR_MAX in locale_impl.hRich Felker-3/+0
unless/until the byte-based C locale is implemented, defining MB_CUR_MAX to 1 in the C locale is wrong. no internal code currently uses the MB_CUR_MAX macro, but having it defined inconsistently is error-prone. applications get the value from stdlib.h and were unaffected.
2015-06-06make static C and C.UTF-8 locales available outside of newlocaleRich Felker-0/+7
2015-05-27overhaul locale internals to treat categories roughly uniformlyRich Felker-7/+5
previously, LC_MESSAGES was treated specially as the only category which could be set to a locale name without a definition file, in order to facilitate gettext message translations when no libc locale was available. LC_NUMERIC was completely un-settable, and LC_CTYPE stored a flag intended to be used for a possible future byte-based C locale, instead of storing a __locale_map pointer like the other categories use. this patch changes all categories to be represented by pointers to __locale_map structures, and allows locale names without definition files to be treated as valid locales with trivial definition when used in any category. outwardly visible functional changes should be minor, limited mainly to the strings read back from setlocale and the way gettext handles translations in categories other than LC_MESSAGES. various internal refactoring has also been performed, and improvements in const correctness have been made.
2015-05-25move call to dynamic linker stage-3 into stage-2 functionRich Felker-1/+1
this move eliminates a duplicate "by-hand" symbol lookup loop from the stage-1 code and replaces it with a call to find_sym, which can be used once we're in stage 2. it reduces the size of the stage 1 code, which is helpful because stage 1 will become the crt start file for static-PIE executables, and it will allow stage 3 to access stage 2's automatic storage, which will be important in an upcoming commit.
2015-05-16eliminate costly tricks to avoid TLS access for current locale stateRich Felker-6/+2
the code being removed used atomics to track whether any threads might be using a locale other than the current global locale, and whether any threads might have abstract 8-bit (non-UTF-8) LC_CTYPE active, a feature which was never committed (still pending). the motivations were to support early execution prior to setup of the thread pointer, to partially support systems (ancient kernels) where thread pointer setup is not possible, and to avoid high performance cost on archs where accessing the thread pointer may be very slow. since commit 19a1fe670acb3ab9ead0fe31859ca7d4fe40dd54, the thread pointer is always available, so these hacks are no longer needed. removing them greatly simplifies the affected code.
2015-05-06fix stack protector crashes on x32 & powerpc due to misplaced TLS canaryRich Felker-1/+6
i386, x86_64, x32, and powerpc all use TLS for stack protector canary values in the default stack protector ABI, but the location only matched the ABI on i386 and x86_64. on x32, the expected location for the canary contained the tid, thus producing spurious mismatches (resulting in process termination) upon fork. on powerpc, the expected location contained the stdio_locks list head, so returning from a function after calling flockfile produced spurious mismatches. in both cases, the random canary was not present, and a predictable value was used instead, making the stack protector hardening much less effective than it should be. in the current fix, the thread structure has been expanded to have canary fields at all three possible locations, and archs that use a non-default location must define a macro in pthread_arch.h to choose which location is used. for most archs (which lack TLS canary ABI) the choice does not matter.
2015-04-22in visibility preinclude, remove overrides for stdin/stdout/stderrRich Felker-3/+0
the motivation for this change is that the extra declaration (with or without visibility) using "struct _IO_FILE" instead of "FILE" seems to trigger a bug in gcc 3.x where it considers the types mismatched. however, this change also results in slightly better code and it is valid because (1) these three objects are constant, and (2) applying the & operator to any of them is invalid C, since they are not even specified to be objects. thus it does not matter if the application and libc see different addresses for them, as long as the (initial, unchanging) value is seen the same by both.
2015-04-22fix inconsistent visibility for __hwcap and __sysinfo symbolsRich Felker-2/+3
these are used as hidden by asm files (and such use is the whole reason they exist), but their actual definitions were not hidden.
2015-04-22remove additional libc struct accessor cruftRich Felker-12/+0
commit f9cccfc16e58b39ee381fbdfb8688db3bb8e3555 left behind the part in libc.c; remove it too.
2015-04-22remove cruft for libc struct accessor function and broken visibilityRich Felker-14/+0
these were hacks to work around toolchains that could not properly optimize PIC accesses based on visibility and would generate GOT lookups even for hidden data, which broke the old dynamic linker. since commit f3ddd173806fd5c60b3f034528ca24542aecc5b9 it no longer matters; the dynamic linker does not assume accessibility of this data until stage 3.
2015-04-19add optional global visibility overrideRich Felker-0/+40
this is implemented via the build system and does not affect source files. the idea is to use protected or hidden visibility to prevent the compiler from pessimizing function calls within a shared (or position-independent static) libc in the form of overhead setting up for a call through the PLT. the ld-time symbol binding via the -Bsymbolic-functions option already optimized out the PLT itself, but not the code in the caller needed to support a call through the PLT. on some archs this overhead can be substantial; on others it's trivial.
2015-04-18make dlerror state and message thread-local and dynamically-allocatedRich Felker-0/+2
this fixes truncation of error messages containing long pathnames or symbol names. the dlerror state was previously required by POSIX to be global. the resolution of bug 97 relaxed the requirements to allow thread-safe implementations of dlerror with thread-local state and message buffer.
2015-04-18add missing 'void' in prototypes of internal pthread functionsAlexander Monakov-6/+6
2015-04-14fix inconsistent visibility for internal syscall symbolsRich Felker-1/+11
2015-04-14use hidden visibility for i386 asm-internal __vsyscall symbolRich Felker-0/+2
otherwise the call instruction in the inline syscall asm results in textrels without ld-time binding.
2015-04-13remove remnants of support for running in no-thread-pointer modeRich Felker-2/+1
since 1.1.0, musl has nominally required a thread pointer to be setup. most of the remaining code that was checking for its availability was doing so for the sake of being usable by the dynamic linker. as of commit 71f099cb7db821c51d8f39dfac622c61e54d794c, this is no longer necessary; the thread pointer is now valid before any libc code (outside of dynamic linker bootstrap functions) runs. this commit essentially concludes "phase 3" of the "transition path for removing lazy init of thread pointer" project that began during the 1.1.0 release cycle.
2015-04-13dynamic linker bootstrap overhaulRich Felker-0/+57
this overhaul further reduces the amount of arch-specific code needed by the dynamic linker and removes a number of assumptions, including: - that symbolic function references inside libc are bound at link time via the linker option -Bsymbolic-functions. - that libc functions used by the dynamic linker do not require access to data symbols. - that static/internal function calls and data accesses can be made without performing any relocations, or that arch-specific startup code handled any such relocations needed. removing these assumptions paves the way for allowing libc.so itself to be built with stack protector (among other things), and is achieved by a three-stage bootstrap process: 1. relative relocations are processed with a flat function. 2. symbolic relocations are processed with no external calls/data. 3. main program and dependency libs are processed with a fully-functional libc/ldso. reduction in arch-specific code is achived through the following: - crt_arch.h, used for generating crt1.o, now provides the entry point for the dynamic linker too. - asm is no longer responsible for skipping the beginning of argv[] when ldso is invoked as a command. - the functionality previously provided by __reloc_self for heavily GOT-dependent RISC archs is now the arch-agnostic stage-1. - arch-specific relocation type codes are mapped directly as macros rather than via an inline translation function/switch statement.
2015-04-10redesign and simplify vmlock systemRich Felker-0/+4
this global lock allows certain unlock-type primitives to exclude mmap/munmap operations which could change the identity of virtual addresses while references to them still exist. the original design mistakenly assumed mmap/munmap would conversely need to exclude the same operations which exclude mmap/munmap, so the vmlock was implemented as a sort of 'symmetric recursive rwlock'. this turned out to be unnecessary. commit 25d12fc0fc51f1fae0f85b4649a6463eb805aa8f already shortened the interval during which mmap/munmap held their side of the lock, but left the inappropriate lock design and some inefficiency. the new design uses a separate function, __vm_wait, which does not hold any lock itself and only waits for lock users which were already present when it was called to release the lock. this is sufficient because of the way operations that need to be excluded are sequenced: the "unlock-type" operations using the vmlock need only block mmap/munmap operations that are precipitated by (and thus sequenced after) the atomic-unlock they perform while holding the vmlock. this allows for a spectacular lack of synchronization in the __vm_wait function itself.
2015-03-11add aarch64 portSzabolcs Nagy-0/+13
This adds complete aarch64 target support including bigendian subarch. Some of the long double math functions are known to be broken otherwise interfaces should be fully functional, but at this point consider this port experimental. Initial work on this port was done by Sireesh Tripurari and Kevin Bortis.