summaryrefslogtreecommitdiff
path: root/src/internal/pthread_impl.h
AgeCommit message (Collapse)AuthorLines
2011-08-12pthread and synccall cleanup, new __synccall_wait opRich Felker-0/+1
fix up clone signature to match the actual behavior. the new __syncall_wait function allows a __synccall callback to wait for other threads to continue without returning, so that it can resume action after the caller finishes. this interface could be made significantly more general/powerful with minimal effort, but i'll wait to do that until it's actually useful for something.
2011-08-03overhaul rwlocks to address several issuesRich Felker-4/+2
like mutexes and semaphores, rwlocks suffered from a race condition where the unlock operation could access the lock memory after another thread successfully obtained the lock (and possibly destroyed or unmapped the object). this has been fixed in the same way it was fixed for other lock types. in addition, the previous implementation favored writers over readers. in the absence of other considerations, that is the best behavior for rwlocks, and posix explicitly allows it. however posix also requires read locks to be recursive. if writers are favored, any attempt to obtain a read lock while a writer is waiting for the lock will fail, causing "recursive" read locks to deadlock. this can be avoided by keeping track of which threads already hold read locks, but doing so requires unbounded memory usage, and there must be a fallback case that favors readers in case memory allocation failed. and all of this must be synchronized. the cost, complexity, and risk of errors in getting it right is too great, so we simply favor readers. tracking of the owner of write locks has been removed, as it was not useful for anything. it could allow deadlock detection, but it's not clear to me that returning EDEADLK (which a buggy program is likely to ignore) is better than deadlocking; at least the latter behavior prevents further data corruption. a correct program cannot invoke this situation anyway. the reader count and write lock state, as well as the "last minute" waiter flag have all been combined into a single atomic lock. this means all state transitions for the lock are atomic compare-and-swap operations. this makes establishing correctness much easier and may improve performance. finally, some code duplication has been cleaned up. more is called for, especially the standard __timedwait idiom repeated in all locks.
2011-08-02unify and overhaul timed futex waitsRich Felker-2/+1
new features: - FUTEX_WAIT_BITSET op will be used for timed waits if available. this saves a call to clock_gettime. - error checking for the timespec struct is now inside __timedwait so it doesn't need to be duplicated everywhere. cond_timedwait still needs to duplicate it to avoid unlocking the mutex, though. - pushing and popping the cancellation handler is delegated to __timedwait, and cancellable/non-cancellable waits are unified.
2011-07-30add proper fuxed-based locking for stdioRich Felker-0/+2
previously, stdio used spinlocks, which would be unacceptable if we ever add support for thread priorities, and which yielded pathologically bad performance if an application attempted to use flockfile on a key file as a major/primary locking mechanism. i had held off on making this change for fear that it would hurt performance in the non-threaded case, but actually support for recursive locking had already inflicted that cost. by having the internal locking functions store a flag indicating whether they need to perform unlocking, rather than using the actual recursive lock counter, i was able to combine the conditionals at unlock time, eliminating any additional cost, and also avoid a nasty corner case where a huge number of calls to ftrylockfile could cause deadlock later at the point of internal locking. this commit also fixes some issues with usage of pthread_self conflicting with __attribute__((const)) which resulted in crashes with some compiler versions/optimizations, mainly in flockfile prior to pthread_create.
2011-07-29new attempt at making set*id() safe and robustRich Felker-3/+3
changing credentials in a multi-threaded program is extremely difficult on linux because it requires synchronizing the change between all threads, which have their own thread-local credentials on the kernel side. this is further complicated by the fact that changing the real uid can fail due to exceeding RLIMIT_NPROC, making it possible that the syscall will succeed in some threads but fail in others. the old __rsyscall approach being replaced was robust in that it would report failure if any one thread failed, but in this case, the program would be left in an inconsistent state where individual threads might have different uid. (this was not as bad as glibc, which would sometimes even fail to report the failure entirely!) the new approach being committed refuses to change real user id when it cannot temporarily set the rlimit to infinity. this is completely POSIX conformant since POSIX does not require an implementation to allow real-user-id changes for non-privileged processes whatsoever. still, setting the real uid can fail due to memory allocation in the kernel, but this can only happen if there is not already a cached object for the target user. thus, we forcibly serialize the syscalls attempts, and fail the entire operation on the first failure. this *should* lead to an all-or-nothing success/failure result, but it's still fragile and highly dependent on kernel developers not breaking things worse than they're already broken. ideally linux will eventually add a CLONE_USERCRED flag that would give POSIX conformant credential changes without any hacks from userspace, and all of this code would become redundant and could be removed ~10 years down the line when everyone has abandoned the old broken kernels. i'm not holding my breath...
2011-06-14fix race condition in pthread_killRich Felker-0/+1
if thread id was reused by the kernel between the time pthread_kill read it from the userspace pthread_t object and the time of the tgkill syscall, a signal could be sent to the wrong thread. the tgkill syscall was supposed to prevent this race (versus the old tkill syscall) but it can't; it can only help in the case where the tid is reused in a different process, but not when the tid is reused in the same process. the only solution i can see is an extra lock to prevent threads from exiting while another thread is trying to pthread_kill them. it should be very very cheap in the non-contended case.
2011-06-13fix sigset macro for 64-bit systems (<< was overflowing due to wrong type)Rich Felker-1/+1
2011-05-30implement uselocale function (minimal)Rich Felker-0/+2
2011-05-07optimize compound-literal sigset_t's not to contain useless hurd bitsRich Felker-2/+4
2011-05-07overhaul implementation-internal signal protectionsRich Felker-3/+6
the new approach relies on the fact that the only ways to create sigset_t objects without invoking UB are to use the sig*set() functions, or from the masks returned by sigprocmask, sigaction, etc. or in the ucontext_t argument to a signal handler. thus, as long as sigfillset and sigaddset avoid adding the "protected" signals, there is no way the application will ever obtain a sigset_t including these bits, and thus no need to add the overhead of checking/clearing them when sigprocmask or sigaction is called. note that the old code actually *failed* to remove the bits from sa_mask when sigaction was called. the new implementations are also significantly smaller, simpler, and faster due to ignoring the useless "GNU HURD signals" 65-1024, which are not used and, if there's any sanity in the world, never will be used.
2011-05-06completely new barrier implementation, addressing major correctness issuesRich Felker-4/+4
the previous implementation had at least 2 problems: 1. the case where additional threads reached the barrier before the first wave was finished leaving the barrier was untested and seemed not to be working. 2. threads leaving the barrier continued to access memory within the barrier object after other threads had successfully returned from pthread_barrier_wait. this could lead to memory corruption or crashes if the barrier object had automatic storage in one of the waiting threads and went out of scope before all threads finished returning, or if one thread unmapped the memory in which the barrier object lived. the new implementation avoids both problems by making the barrier state essentially local to the first thread which enters the barrier wait, and forces that thread to be the last to return.
2011-04-17overhaul pthread cancellationRich Felker-1/+3
this patch improves the correctness, simplicity, and size of cancellation-related code. modulo any small errors, it should now be completely conformant, safe, and resource-leak free. the notion of entering and exiting cancellation-point context has been completely eliminated and replaced with alternative syscall assembly code for cancellable syscalls. the assembly is responsible for setting up execution context information (stack pointer and address of the syscall instruction) which the cancellation signal handler can use to determine whether the interrupted code was in a cancellable state. these changes eliminate race conditions in the previous generation of cancellation handling code (whereby a cancellation request received just prior to the syscall would not be processed, leaving the syscall to block, potentially indefinitely), and remedy an issue where non-cancellable syscalls made from signal handlers became cancellable if the signal handler interrupted a cancellation point. x86_64 asm is untested and may need a second try to get it right.
2011-04-14use a separate signal from SIGCANCEL for SIGEV_THREAD timersRich Felker-0/+1
otherwise we cannot support an application's desire to use asynchronous cancellation within the callback function. this change also slightly debloats pthread_create.c.
2011-04-09greatly improve SIGEV_THREAD timersRich Felker-0/+1
calling pthread_exit from, or pthread_cancel on, the timer callback thread will no longer destroy the timer.
2011-04-06move rsyscall out of pthread_create moduleRich Felker-0/+3
this is something of a tradeoff, as now set*id() functions, rather than pthread_create, are what pull in the code overhead for dealing with linux's refusal to implement proper POSIX thread-vs-process semantics. my motivations are: 1. it's cleaner this way, especially cleaner to optimize out the rsyscall locking overhead from pthread_create when it's not needed. 2. it's expected that only a tiny number of core system programs will ever use set*id() functions, whereas many programs may want to use threads, and making thread overhead tiny is an incentive for "light" programs to try threads.
2011-03-30optimize timer creation and possibly protect against some minor racesRich Felker-2/+0
the major idea of this patch is not to depend on having the timer pointer delivered to the signal handler, and instead use the thread pointer to get the callback function address and argument. this way, the parent thread can make the timer_create syscall while the child thread is starting, and it should never have to block waiting for the barrier.
2011-03-29major improvements to cancellation handlingRich Felker-2/+5
- there is no longer any risk of spoofing cancellation requests, since the cancel flag is set in pthread_cancel rather than in the signal handler. - cancellation signal is no longer unblocked when running the cancellation handlers. instead, pthread_create will cause any new threads created from a cancellation handler to unblock their own cancellation signal. - various tweaks in preparation for POSIX timer support.
2011-03-29some preliminaries for adding POSIX timersRich Felker-0/+4
2011-03-28remove useless field in pthread struct (wasted a good bit of space)Rich Felker-1/+0
2011-03-17implement robust mutexesRich Felker-0/+5
some of this code should be cleaned up, e.g. using macros for some of the bit flags, masks, etc. nonetheless, the code is believed to be working and correct at this point.
2011-03-17reorder mutex struct fields to make room for pointers (upcoming robust mutexes)Rich Felker-1/+3
the layout has been chosen so that pointer slots 3 and 4 fit between the integer slots on 32-bit archs, and come after the integer slots on 64-bit archs.
2011-03-17unify lock and owner fields of mutex structureRich Felker-1/+0
this change is necessary to free up one slot in the mutex structure so that we can use doubly-linked lists in the implementation of robust mutexes.
2011-03-10optimize pthread termination in the non-detached caseRich Felker-0/+1
we can avoid blocking signals by simply using a flag to mark that the thread has exited and prevent it from getting counted in the rsyscall signal-pingpong. this restores the original pthread create/join throughput from before the sigprocmask call was added.
2011-03-08fix and optimize non-default-type mutex behaviorRich Felker-0/+1
problem 1: mutex type from the attribute was being ignored by pthread_mutex_init, so recursive/errorchecking mutexes were never being used at all. problem 2: ownership of recursive mutexes was not being enforced at unlock time.
2011-03-07use the selected clock from the condattr for pthread_cond_timedwaitRich Felker-0/+1
2011-02-17reorganize pthread data structures and move the definitions to alltypes.hRich Felker-0/+19
this allows sys/types.h to provide the pthread types, as required by POSIX. this design also facilitates forcing ABI-compatible sizes in the arch-specific alltypes.h, while eliminating the need for developers changing the internals of the pthread types to poke around with arch-specific headers they may not be able to test.
2011-02-15finish unifying thread register handling in preparation for portingRich Felker-8/+2
2011-02-15begin unifying clone/thread management interface in preparation for portingRich Felker-5/+3
2011-02-12initial check-in, version 0.5.0v0.5.0Rich Felker-0/+68