summaryrefslogtreecommitdiff
path: root/arch/microblaze
AgeCommit message (Collapse)AuthorLines
2016-03-18deduplicate bits/mman.hSzabolcs Nagy-59/+0
currently five targets use the same mman.h constants and the rest share most constants too, so move them to sys/mman.h before the bits/mman.h include where the differences can be corrected by redefinition of the macros. this fixes two minor bugs: POSIX_MADV_DONTNEED was wrong on most targets (it should be the same as MADV_DONTNEED), and sh defined the x86-only MAP_32BIT mmap flag.
2016-01-27deduplicate the bulk of the arch bits headersRich Felker-644/+0
all bits headers that were identical for a number of 'clean' archs are moved to the new arch/generic tree. in addition, a few headers that differed only cosmetically from the new generic version are removed. additional deduplication may be possible in mman.h and in several headers (limits.h, posix.h, stdint.h) that mostly depend on whether the arch is 32- or 64-bit, but they are left alone for now because greater gains are likely possible with more invasive changes to header logic, which is beyond the scope of this commit.
2016-01-26add MCL_ONFAULT and MLOCK_ONFAULT mlockall and mlock2 flagsSzabolcs Nagy-0/+1
they lock faulted pages into memory (useful when a small part of a large mapped file needs efficient access), new in linux v4.4, commit b0f205c2a3082dd9081f9a94e50658c5fa906ff1 MLOCK_* is not in the POSIX reserved namespace for sys/mman.h
2016-01-21refactor internal atomic.hRich Felker-143/+53
rather than having each arch provide its own atomic.h, there is a new shared atomic.h in src/internal which pulls arch-specific definitions from arc/$(ARCH)/atomic_arch.h. the latter can be extremely minimal, defining only a_cas or new ll/sc type primitives which the shared atomic.h will use to construct everything else. this commit avoids making heavy changes to the individual archs' atomic implementations. definitions which are identical or near-identical to what the new shared atomic.h would produce have been removed, but otherwise the changes made are just hooking up the arch-specific files to the new infrastructure. major changes to take advantage of the new system will come in subsequent commits.
2015-11-02properly access mcontext_t program counter in cancellation handlerRich Felker-1/+1
using the actual mcontext_t definition rather than an overlaid pointer array both improves correctness/readability and eliminates some ugly hacks for archs with 64-bit registers bit 32-bit program counter. also fix UB due to comparison of pointers not in a common array object.
2015-09-17new dlstart stage-2 chaining for microblazeRich Felker-0/+7
2015-05-22add .text section directive to all crt_arch.h files missing itRich Felker-0/+1
i386 and x86_64 versions already had the .text directive; other archs did not. normally, top-level (file scope) __asm__ starts in the .text section anyway, but problems were reported with some versions of clang, and it seems preferable to set it explicitly anyway, at least for the sake of consistency between archs.
2015-04-30fix __syscall declaration with wrong visibility in syscall_arch.hSzabolcs Nagy-2/+0
remove __syscall declaration where it is not needed (aarch64, arm, microblaze, or1k) and add the hidden attribute where it is (mips).
2015-04-17add execveat syscall number to microblazeSzabolcs Nagy-0/+2
syscall number was reserved in linux v4.0, kernel commit add4b1b02da7e7ec35c34dd04d351ac53f3f0dd8
2015-04-13dynamic linker bootstrap overhaulRich Felker-49/+25
this overhaul further reduces the amount of arch-specific code needed by the dynamic linker and removes a number of assumptions, including: - that symbolic function references inside libc are bound at link time via the linker option -Bsymbolic-functions. - that libc functions used by the dynamic linker do not require access to data symbols. - that static/internal function calls and data accesses can be made without performing any relocations, or that arch-specific startup code handled any such relocations needed. removing these assumptions paves the way for allowing libc.so itself to be built with stack protector (among other things), and is achieved by a three-stage bootstrap process: 1. relative relocations are processed with a flat function. 2. symbolic relocations are processed with no external calls/data. 3. main program and dependency libs are processed with a fully-functional libc/ldso. reduction in arch-specific code is achived through the following: - crt_arch.h, used for generating crt1.o, now provides the entry point for the dynamic linker too. - asm is no longer responsible for skipping the beginning of argv[] when ldso is invoked as a command. - the functionality previously provided by __reloc_self for heavily GOT-dependent RISC archs is now the arch-agnostic stage-1. - arch-specific relocation type codes are mapped directly as macros rather than via an inline translation function/switch statement.
2015-04-01move O_PATH definition back to arch bitsRich Felker-0/+1
while it's the same for all presently supported archs, it differs at least on sparc, and conceptually it's no less arch-specific than the other O_* macros. O_SEARCH and O_EXEC are still defined in terms of O_PATH in the main fcntl.h.
2015-03-18fix MINSIGSTKSZ values for archs with large signal contextsRich Felker-0/+5
the previous values (2k min and 8k default) were too small for some archs. aarch64 reserves 4k in the signal context for future extensions and requires about 4.5k total, and powerpc reportedly uses over 2k. the new minimums are chosen to fit the saved context and also allow a minimal signal handler to run. since the default (SIGSTKSZ) has always been 6k larger than the minimum, it is also increased to maintain the 6k usable by the signal handler. this happens to be able to store one pathname buffer and should be sufficient for calling any function in libc that doesn't involve conversion between floating point and decimal representations. x86 (both 32-bit and 64-bit variants) may also need a larger minimum (around 2.5k) in the future to support avx-512, but the values on these archs are left alone for now pending further analysis. the value for PTHREAD_STACK_MIN is not increased to match MINSIGSTKSZ at this time. this is so as not to preclude applications from using extremely small thread stacks when they know they will not be handling signals. unfortunately cancellation and multi-threaded set*id() use signals as an implementation detail and therefore require a stack large enough for a signal context, so applications which use extremely small thread stacks may still need to avoid using these features.
2015-03-07fix FLT_ROUNDS to reflect the current rounding modeSzabolcs Nagy-1/+0
Implemented as a wrapper around fegetround introducing a new function to the ABI: __flt_rounds. (fegetround cannot be used directly from float.h)
2015-03-04fix POLLWRNORM and POLLWRBAND on mipsTrutz Behn-0/+0
these macros have the same distinct definition on blackfin, frv, m68k, mips, sparc and xtensa kernels. POLLMSG and POLLRDHUP additionally differ on sparc.
2015-03-03make all objects used with atomic operations volatileRich Felker-7/+7
the memory model we use internally for atomics permits plain loads of values which may be subject to concurrent modification without requiring that a special load function be used. since a compiler is free to make transformations that alter the number of loads or the way in which loads are performed, the compiler is theoretically free to break this usage. the most obvious concern is with atomic cas constructs: something of the form tmp=*p;a_cas(p,tmp,f(tmp)); could be transformed to a_cas(p,*p,f(*p)); where the latter is intended to show multiple loads of *p whose resulting values might fail to be equal; this would break the atomicity of the whole operation. but even more fundamental breakage is possible. with the changes being made now, objects that may be modified by atomics are modeled as volatile, and the atomic operations performed on them by other threads are modeled as asynchronous stores by hardware which happens to be acting on the request of another thread. such modeling of course does not itself address memory synchronization between cores/cpus, but that aspect was already handled. this all seems less than ideal, but it's the best we can do without mandating a C11 compiler and using the C11 model for atomics. in the case of pthread_once_t, the ABI type of the underlying object is not volatile-qualified. so we are assuming that accessing the object through a volatile-qualified lvalue via casts yields volatile access semantics. the language of the C standard is somewhat unclear on this matter, but this is an assumption the linux kernel also makes, and seems to be the correct interpretation of the standard.
2015-01-30move MREMAP_MAYMOVE and MREMAP_FIXED out of bitsTrutz Behn-3/+0
the definitions are generic for all kernel archs. exposure of these macros now only occurs on the same feature test as for the function accepting them, which is believed to be more correct.
2014-12-23add new syscall numbers for bpf and kexec_file_loadSzabolcs Nagy-0/+2
these syscalls are new in linux v3.18, bpf is present on all supported archs except sh, kexec_file_load is only allocted for x86_64 and x32 yet. bpf was added in linux commit 99c55f7d47c0dc6fc64729f37bf435abf43f4c60 kexec_file_load syscall number was allocated in commit f0895685c7fd8c938c91a9d8a6f7c11f22df58d2
2014-12-21move wint_t definition to the shared part of alltypes.h.inRich Felker-1/+0
2014-11-22unify non-inline version of syscall code across archsRich Felker-34/+2
except powerpc, which still lacks inline syscalls simply because nobody has written the code, these are all fallbacks used to work around a clang bug that probably does not exist in versions of clang that can compile musl. however, it's useful to have the generic non-inline code anyway, as it eases the task of porting to new archs: writing inline syscall code is now optional. this approach could also help support compilers which don't understand inline asm or lack support for the needed register constraints. mips could not be unified because it has special fixup code for broken layout of the kernel's struct stat.
2014-10-10add explicit barrier operation to internal atomic.h APIRich Felker-1/+3
2014-10-08add new syscall numbers for seccomp, getrandom, memfd_createSzabolcs Nagy-0/+8
these syscalls are new in linux v3.17 and present on all supported archs except sh. seccomp was added in commit 48dc92b9fc3926844257316e75ba11eb5c742b2c it has operation, flags and pointer arguments (if flags==0 then it is the same as prctl(PR_SET_SECCOMP,...)), the uapi header for flag definitions is linux/seccomp.h getrandom was added in commit c6e9d6f38894798696f23c8084ca7edbf16ee895 it provides an entropy source when open("/dev/urandom",..) would fail, the uapi header for flags is linux/random.h memfd_create was added in commit 9183df25fe7b194563db3fec6dc3202a5855839c it allows anon mmap to have an fd, that can be shared, sealed and needs no mount point, the uapi header for flags is linux/memfd.h
2014-09-06add threads.h and needed per-arch types for mtx_t and cnd_tRich Felker-0/+2
based on patch by Jens Gustedt. mtx_t and cnd_t are defined in such a way that they are formally "compatible types" with pthread_mutex_t and pthread_cond_t, respectively, when accessed from a different translation unit. this makes it possible to implement the C11 functions using the pthread functions (which will dereference them with the pthread types) without having to use the same types, which would necessitate either namespace violations (exposing pthread type names in threads.h) or incompatible changes to the C++ name mangling ABI for the pthread types. for the rest of the types, things are much simpler; using identical types is possible without any namespace considerations.
2014-08-25add working a_spin() atomic for non-x86 targetsRich Felker-0/+1
conceptually, a_spin needs to be at least a compiler barrier, so the compiler will not optimize out loops (and the load on each iteration) while spinning. it should also be a memory barrier, or the spinning thread might keep spinning without noticing stores from other threads, thus delaying for longer than it should. ideally, an optimal a_spin implementation that avoids unnecessary cache/memory contention should be chosen for each arch, but for now, the easiest thing is to perform a useless a_cas on the calling thread's stack.
2014-08-20add max_align_t definition for C11 and C++11Rich Felker-0/+2
unfortunately this needs to be able to vary by arch, because of a huge mess GCC made: the GCC definition, which became the ABI, depends on quirks in GCC's definition of __alignof__, which does not match the formal alignment of the type. GCC's __alignof__ unexpectedly exposes the an implementation detail, its "preferred alignment" for the type, rather than the formal/ABI alignment of the type, which it only actually uses in structures. on most archs the two values are the same, but on some (at least i386) the preferred alignment is greater than the ABI alignment. I considered using _Alignas(8) unconditionally, but on at least one arch (or1k), the alignment of max_align_t with GCC's definition is only 4 (even the "preferred alignment" for these types is only 4).
2014-08-17make pointers used in robust list volatileRich Felker-1/+1
when manipulating the robust list, the order of stores matters, because the code may be asynchronously interrupted by a fatal signal and the kernel will then access the robust list in what is essentially an async-signal context. previously, aliasing considerations made it seem unlikely that a compiler could reorder the stores, but proving that they could not be reordered incorrectly would have been extremely difficult. instead I've opted to make all the pointers used as part of the robust list, including those in the robust list head and in the individual mutexes, volatile. in addition, the format of the robust list has been changed to point back to the head at the end, rather than ending with a null pointer. this is to match the documented kernel robust list ABI. the null pointer, which was previously used, only worked because faults during access terminate the robust list processing.
2014-07-27clean up unused and inconsistent atomics in arch dirsRich Felker-5/+0
the a_cas_l, a_swap_l, a_swap_p, and a_store_l operations were probably used a long time ago when only i386 and x86_64 were supported. as other archs were added, support for them was inconsistent, and they are obviously not in use at present. having them around potentially confuses readers working on new ports, and the type-punning hacks and inconsistent use of types in their definitions is not a style I wish to perpetuate in the source tree, so removing them seems appropriate.
2014-07-19fix microblaze atomic storeRich Felker-1/+3
as far as I can tell, microblaze is strongly ordered, but this does not seem to be well-documented and the assumption may need revisiting. even with strong ordering, however, a volatile C assignment is not sufficient to implement atomic store, since it does not preclude reordering by the compiler with respect to non-volatile stores and loads. simply flanking a C store with empty volatile asm blocks with memory clobbers would achieve the desired result, but is likely to result in worse code generation, since the address and value for the store may need to be spilled. actually writing the store in asm, so that there's only one asm block, should give optimal code generation while satisfying the requirement for having a compiler barrier.
2014-07-19remove cruft from microblaze atomic.hRich Felker-13/+0
2014-07-18fix microblaze definition of struct statRich Felker-3/+2
the erroneous definition was missed because with works with qemu user-level emulation, which also has the wrong definition. the actual kernel uses the asm-generic generic definition.
2014-06-18refactor to remove arch-specific relocation code from dynamic linkerRich Felker-17/+9
this was one of the main instances of ugly code duplication: all archs use basically the same types of relocations, but roughly equivalent logic was duplicated for each arch to account for the different naming and numbering of relocation types and variation in whether REL or RELA records are used. as an added bonus, both REL and RELA are now supported on all archs, regardless of which is used by the standard toolchain.
2014-06-16dynamic linker: permit error returns from arch-specific reloc functionRich Felker-1/+2
the immediate motivation is supporting TLSDESC relocations which require allocation and thus may fail (unless we pre-allocate), but this mechanism should also be used for throwing an error on unsupported or invalid relocation types, and perhaps in certain cases, for reporting when a relocation is not satisfiable.
2014-05-30add sched_{get,set}attr syscall numbers and SCHED_DEADLINE macroSzabolcs Nagy-0/+4
linux 3.14 introduced sched_getattr and sched_setattr syscalls in commit d50dde5a10f305253cbc3855307f608f8a3c5f73 and the related SCHED_DEADLINE scheduling policy in commit aab03e05e8f7e26f51dee792beddcb5cca9215a5 but struct sched_attr "extended scheduling parameters data structure" is not yet exported to userspace (necessary for using the syscalls) so related uapi definitions are not added yet.
2014-04-15fix RLIMIT_ constants for mipsSzabolcs Nagy-0/+0
The mips arch is special in that it uses different RLIMIT_ numbers than other archs, so allow bits/resource.h to override the default RLIMIT_ numbers (empty on all archs except mips). Reported by orc.
2014-04-02fix microblaze syscall register clobbersRich Felker-7/+7
the kernel entry point for syscalls on microblaze nominally saves and restores all registers, and testing on qemu always worked since qemu behaves this way too. however, the real kernel treats r3:r4 as a potential 64-bit return value from the syscall function, and copies both over top of the saved registers before returning to userspace. thus, we need to treat r4 as always-clobbered.
2014-03-18fix signal.h breakage from moving stack_t to arch-specific bitsRich Felker-6/+6
in the previous changes, I missed the fact that both the prototype of the sigaltstack function and the definition of ucontext_t depend on stack_t.
2014-03-18move signal.h definition of stack_t to arch-specific bitsRich Felker-0/+6
it's different at least on mips. mips version will be fixed in a separate commit to show the change.
2014-03-11move struct semid_ds to from shared sys/sem.h to bitsRich Felker-0/+16
the definition was found to be incorrect at least for powerpc, and fixing this cleanly requires making the definition arch-specific. this will allow cleaning up the definition for other archs to make it more specific, and reversing some of the ugliness (time_t hacks) introduced with the x32 port. this first commit simply copies the existing definition to each arch without any changes. this is intentional, to make it easier to review changes made on a per-arch basis.
2014-02-24fixup general __syscall breakage introduced in x32 portrofl0r-0/+2
the reordering of headers caused some risc archs to not see the __syscall declaration anymore. this caused build errors on mips with any compiler, and on arm and microblaze with clang. we now declare it locally just like the powerpc port does.
2014-02-23sys/shm.h: move arch specific structs to bits/rofl0r-0/+11
2014-01-08add IUTF8 to termios.h on archs that were missing itRich Felker-0/+1
2014-01-08fix namespace violations in termios.h, at least mostlyRich Felker-8/+7
the fix should be complete on archs that use the generic definitions (i386, arm, x86_64, microblaze), but mips and powerpc have not been checked thoroughly and may need more fixes.
2013-11-23add O_TMPFILE flag, new in linux 3.11Szabolcs Nagy-0/+1
definition in linux: #define O_TMPFILE (__O_TMPFILE | O_DIRECTORY) where __O_TMPFILE and O_DIRECTORY are arch specific
2013-11-20fix the nominal type of LDBL_* limits on archs with ld64Rich Felker-4/+4
previously these macros wrongly had type double rather than long double. I see no way an application could detect the error in C99, but C11's _Generic can trivially detect it. at the same time, even though these archs do not have excess precision, the number of decimal places used to represent these constants has been increased to 21 to be consistent with the decimal representations used for the DBL_* macros.
2013-09-15support configurable page size on mips, powerpc and microblazeSzabolcs Nagy-2/+1
PAGE_SIZE was hardcoded to 4096, which is historically what most systems use, but on several archs it is a kernel config parameter, user space can only know it at execution time from the aux vector. PAGE_SIZE and PAGESIZE are not defined on archs where page size is a runtime parameter, applications should use sysconf(_SC_PAGE_SIZE) to query it. Internally libc code defines PAGE_SIZE to libc.page_size, which is set to aux[AT_PAGESZ] in __init_libc and early in __dynlink as well. (Note that libc.page_size can be accessed without GOT, ie. before relocations are done) Some fpathconf settings are hardcoded to 4096, these should be actually queried from the filesystem using statfs.
2013-08-11add missing a_or_l to atomic.h for non-x86 archsRich Felker-0/+5
this is needed for recently committed sigaction code
2013-07-26new mostly-C crt1 implementationRich Felker-0/+11
the only immediate effect of this commit is enabling PIE support on some archs that did not previously have any Scrt1.s, since the existing asm files for crt1 override this C code. so some of the crt_arch.h files committed are only there for the sake of documenting what their archs "would do" if they used the new C-based crt1. the expectation is that new archs should use this new system rather than using heavy asm for crt1. aside from being easier and less error-prone, it also ensures that PIE support is available immediately (since Scrt1.o is generated from the same C source, using -fPIC) rather than having to be added as an afterthought in the porting process.
2013-07-24change jmp_buf to share an underlying type and struct tag with sigjmp_bufRich Felker-1/+1
this is necessary to meet the C++ ABI target. alternatives were considered to avoid the size increase for non-sig jmp_buf objects, but they seemed to have worse properties. moreover, the relative size increase is only extreme on x86[_64]; one way of interpreting this is that, if the size increase from this patch makes jmp_buf use too much memory, then the program was already using too much memory when built for non-x86 archs.
2013-07-22remove SIG_ATOMIC_MIN/MAX from stdint bits headersRich Felker-2/+0
i386 was done with the big commit but I missed the others
2013-07-22fix regression in size of nlink_t (broken stat struct) on x86_64Rich Felker-0/+1
rather than moving nlink_t back to the arch-specific file, I've added a macro _Reg defined to the canonical type for register-size values on the arch. this is not the same as _Addr for (not-yet-supported) 32-on-64 pseudo-archs like x32 and mips n32, so a new macro was needed.
2013-07-22change wint_t to unsignedRich Felker-1/+1
aside from the obvious C++ ABI purpose for this change, it also brings musl into alignment with the compiler's idea of the definition of wint_t (use in -Wformat), and makes the situation less awkward on ARM, where wchar_t is unsigned. internal code using wint_t and WEOF was checked against this change, and while a few cases of storing WEOF into wchar_t were found, they all seem to operate properly with the natural conversion from unsigned to signed.