| Age | Commit message (Collapse) | Author | Lines |
|---|
|
apparently initializing a variable is not "using" it but assigning to
it is "using" it. i don't really like this fix, but it's better than
trying to make a bigger cleanup just before a release, and it should
work fine (tested against nsz's math tests).
|
|
this only works with gcc 4.6 and later, but it allows us to support
non-default endianness on archs like arm, mips, ppc, etc. that can do
both without having separate header sets for both variants, and it
saves one #include even on fixed-endianness archs like x86.
|
|
|
|
apparently some packages see stropts.h and want to be able to use
this. the implementation checks that the file descriptor is valid by
using fcntl/F_GETFD so it can report an error if not (as specified).
|
|
make nexttoward, nexttowardf independent of long double representation.
fix nextafterl: it did not raise underflow flag when the result was 0.
|
|
two issues: (1) the type was wrong (unsigned instead of signed int),
and (2) the value of FP_ILOGBNAN should be INT_MIN rather than INT_MAX
to match the ABI. this is also much more useful since INT_MAX
corresponds to a valid input (infinity). the standard would allow us
to set FP_ILOGB0 to -INT_MAX instead of INT_MIN, which would give us
distinct values for ilogb(0) and ilogb(NAN), but the benefit seems way
too small to justify ignoring the ABI.
note that the macro is just a "portable" (to any twos complement
system where signed and unsigned int have the same width) way to write
INT_MIN without needing limits.h. it's valid to use this method since
these macros are not required to work in #if directives.
|
|
|
|
|
|
|
|
these changes are based on the following communication via email:
"I hereby grant that all of the code I have contributed to musl on or
before April 23, 2012 may be licensed under the terms of the following
MIT license:
Copyright (c) 2011-2012 Nicholas J. Kain
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE."
|
|
|
|
this script is not based on autoconf; however it attempts to follow
the same interface contracts for ease of integration with build
systems. it is also not necessary to use musl. manually written
config.mak files are still supported, as is building without any
config.mak at all as long as you are happy with the default options
and you supply at least ARCH on the command line to make.
|
|
this change is necessary or pthread_create will always fail on
security-hardened kernels. i considered first trying to make the stack
executable and simply retrying without execute permissions when the
first try fails, but (1) this would incur a serious performance
penalty on hardened systems, and (2) having the stack be executable is
just a bad idea from a security standpoint.
if there is real-world "GNU C" code that uses nested functions with
threads, and it can't be fixed, we'll have to consider other ways of
solving the problem, but for now this seems like the best fix.
|
|
these new rules should avoid spurious error messages when the
directory (usually /lib) and the dynamic linker symlink already exist,
and minimize the spam when they can't be created.
|
|
|
|
|
|
old: 2*atan2(sqrt(1-x),sqrt(1+x))
new: atan2(fabs(sqrt((1-x)*(1+x))),x)
improvements:
* all edge cases are fixed (sign of zero in downward rounding)
* a bit faster (here a single call is about 131ns vs 162ns)
* a bit more precise (at most 1ulp error on 1M uniform random
samples in [0,1), the old formula gave some 2ulp errors as well)
|
|
this could lead to spurious failures of wide printf functions
|
|
|
|
musl does not support legacy 32-bit-off_t whatsoever. off_t is always
64 bit, and correct programs that use off_t and the standard functions
will just work out of the box. (on glibc, they would require
-D_FILE_OFFSET_BITS=64 to work.) however, some programs instead define
_LARGEFILE64_SOURCE and use alternate versions of all the standard
types and functions with "64" appended to their names.
we do not want code to actually get linked against these functions
(it's ugly and inconsistent), so macros are used instead of prototypes
with weak aliases in the library itself. eventually the weak aliases
may be added at the library level for the sake of using code that was
originally built against glibc, but the macros will still be the
desired solution in the headers.
|
|
|
|
these actually work, but for now they prohibit actually setting
priority levels and report min/max priority as 0.
|
|
|
|
in6_* is in the reserved namespace, so this is valid
|
|
pthread structure has been adjusted to match the glibc/GCC abi for
where the canary is stored on i386 and x86_64. it will need variants
for other archs to provide the added security of the canary's entropy,
but even without that it still works as well as the old "minimal" ssp
support. eventually such changes will be made anyway, since they are
also needed for GCC/C11 thread-local storage support (not yet
implemented).
care is taken not to attempt initializing the thread pointer unless
the program actually uses SSP (by reference to __stack_chk_fail).
|
|
hopefully the annoyance of this will be minimal. these files all
define internal interfaces which can change at any time; if different
modules are using different versions of the interfaces, the library
will badly break. ideally we would scan and add the dependency only
for C files that actually reference the affected interfaces, but for
now, err on the side of caution and force a rebuild of everything if
any of them have changed.
this commit is in preparation for the upcoming ssp overhaul commit,
which will change internals of the pthread struct.
|
|
looks like nik copied these "extra arguments" from the i386 code.
they're not actually arguments there, just 1-byte instructions to
make sure the stack is aligned to 16 bytes after all the other
arguments are pushed. since each push is 8 bytes on x86_64, they
happened to have no effect here, but their presence is confusing and a
minor waste of space.
|
|
|
|
|
|
|
|
it does not work; after further consideration, a separate Scrt1.s for
pie really is essential. it would be nice if the unified approach
worked, but the linker fails to generate the correct PLT entries and
instead puts textrels in the main program, which don't work because
the kernel maps the text read-only.
new Scrt1.s will be committed soon in place of this.
|
|
these are POSIX 2008 (previously GNU extension) functions that are
rarely used. apparently they had never been tested before, since the
end-of-string logic was completely missing. mbsnrtowcs is used by
modern versions of bash for its glob implementation, and and this bug
was causing tab completion to hang in an infinite loop.
|
|
these were at best of limited usefulness (for bootstrapping new
systems, mainly) and at worst caused real kernel headers to get
overwritten when upgrading libc.
in case they're needed by anyone, the exact same files are now
available in a new git repository:
git://git.etalabs.net/mini-lkh
|
|
the major change here is that CFLAGS is now a variable that can be
changed entirely under user control, without causing essential flags
to be lost. previously, "CFLAGS += ..." was valid in config.mak, but
using "CFLAGS = ..." in config.mak would have badly broken the build
process unless the user took care to copy the necessary flags out of
the main Makefile.
I have also added a distclean target that removes config.mak.
|
|
as far as I can tell, it's not useful and never way. I wrote it way
back under the assumption that non-weak symbols in the POSIX or
extension namespace could conflict with legitimate uses of the same
symbol name in the main program or other libraries, but that does not
seem to be the case.
|
|
|
|
|
|
this is a nonstandard function so it's not clear what conditions it
should satisfy. my intent is that it be fast and exact for positive
integral exponents when the result fits in the destination type, and
fast and correctly rounded for small negative integral exponents.
otherwise we aim for at most 1ulp error; it seems to differ from pow
by at most 1ulp and it's often 2-5 times faster than pow.
|
|
|
|
this caused misreading of certain floating point values that are exact
multiples of large powers of ten, unpredictable depending on prior
stack contents.
|
|
|
|
untested
|
|
|
|
|
|
|
|
unlike the old one, this one's algorithm does not suffer from
potential stack overflow issues or pathologically bad performance on
certain patterns. instead of backtracking, it uses a matching
algorithm which I have not seen before (unsure whether I invented or
re-invented it) that runs in O(1) space and O(nm) time. it may be
possible to improve the time to O(n), but not without significantly
greater complexity.
|
|
if the compiler provides a value, use it; otherwise fallback to the
platform default (2).
|
|
an invalid bracket expression must be treated as if the opening
bracket were just a literal character. this is to fix a bug whereby
POSIX left the behavior of the "[" shell command undefined due to it
being an invalid bracket expression.
|
|
|
|
provide the minimal level of dynamic linker-to-debugger glue needed to
let gdb find loaded libraries and load their symbols.
|
