Age | Commit message (Collapse) | Author | Lines |
|
now that thread pointer is initialized always, ssp canary
initialization can be done unconditionally. this simplifies
the ldso as it does not try to detect ssp usage, and the
init function itself as it is always called exactly once.
this also merges ssp init path for shared and static linking.
|
|
|
|
consistent use of braces in if/else structure, line length.
|
|
record phentsize in struct dso, so the phdrs can be easily
enumerated via it. simplify all functions enumerating phdrs
to require only struct dso. also merge find_map_range and
find_dso to kernel_mapped_dso function that does both tasks
during single phdr enumeration.
|
|
|
|
|
|
per the specification, the terminating null byte is counted.
|
|
this is the first step in an overhaul aimed at greatly simplifying and
optimizing everything dealing with thread-local state.
previously, the thread pointer was initialized lazily on first access,
or at program startup if stack protector was in use, or at certain
random places where inconsistent state could be reached if it were not
initialized early. while believed to be fully correct, the logic was
fragile and non-obvious.
in the first phase of the thread pointer overhaul, support is retained
(and in some cases improved) for systems/situation where loading the
thread pointer fails, e.g. old kernels.
some notes on specific changes:
- the confusing use of libc.main_thread as an indicator that the
thread pointer is initialized is eliminated in favor of an explicit
has_thread_pointer predicate.
- sigaction no longer needs to ensure that the thread pointer is
initialized before installing a signal handler (this was needed to
prevent a situation where the signal handler caused the thread
pointer to be initialized and the subsequent sigreturn cleared it
again) but it still needs to ensure that implementation-internal
thread-related signals are not blocked.
- pthread tsd initialization for the main thread is deferred in a new
manner to minimize bloat in the static-linked __init_tp code.
- pthread_setcancelstate no longer needs special handling for the
situation before the thread pointer is initialized. it simply fails
on systems that cannot support a thread pointer, which are
non-conforming anyway.
- pthread_cleanup_push/pop now check for missing thread pointer and
nop themselves out in this case, so stdio no longer needs to avoid
the cancellable path when the thread pointer is not available.
a number of cases remain where certain interfaces may crash if the
system does not support a thread pointer. at this point, these should
be limited to pthread interfaces, and the number of such cases should
be fewer than before.
|
|
the external mmap function is heavy because it has to handle error
reporting that the kernel cannot do, and has to do some locking for
arcane race-condition-avoidance purposes. for allocating initial TLS,
we do not need any of that; the raw syscall suffices.
on i386, this change shaves off 13% of the size of .text for the empty
program.
|
|
in general, we aim to always include the header that's declaring a
function before defining it so that the compiler can check that
prototypes match.
additionally, the internal syscall.h declares __syscall_ret with a
visibility attribute to improve code generation for shared libc (to
prevent gratuitous GOT-register loads). this declaration should be
visible at the point where __syscall_ret is defined, too, or the
inconsistency could theoretically lead to problems at link-time.
|
|
|
|
in addition to the dbm functions (which we don't intent to implement
anyway), fmtmsg is still missing too. rather than adding exceptions I
think it's best just to avoid making the claim.
|
|
reduces the amount of news-like content on progress and development
direction and focuses on the present.
|
|
the text covering an ill-advised procedure for 'bootstrapping' a new
musl-based system in-place is removed. new information on targets and
compilers is added. formatting improved. the remaining text is
adjusted to cover both usage with musl-gcc on a non-musl-based system
and upgrading a musl-based system or toolchain.
|
|
|
|
otherwise a multilib compiler used with -mx32 will not be detected
properly.
|
|
in the previous changes, I missed the fact that both the prototype of
the sigaltstack function and the definition of ucontext_t depend on
stack_t.
|
|
like almost everything on mips, this is gratuitously different.
|
|
it's different at least on mips. mips version will be fixed in a
separate commit to show the change.
|
|
this was missed in the previous commit.
|
|
|
|
the excess space was unused and unintentional. this change does not
affect the ABI between applications and libc. while it does
theoretically affect linkage between third-party translation units
using jmp_buf as part of a structure, we've already changed jmp_buf at
least once on all archs, and problems were never observed, likely
because such usage would be very unusual. in any case it's best to get
things right now rather than making changes sometime during the 1.0.x
series or later.
|
|
this seems to have been copied erroneously from the arm version of the
file. it's fairly harmless but it's a mistake and better to fix now
than later.
|
|
on x32, this change allows programs which use syscall() with pointers
or 64-bit values as arguments to work correctly, i.e. without
truncation or incorrect sign extension. on all other supported archs,
syscall_arg_t is defined as long, so this change is a no-op.
|
|
the previous pattern required "x32" to be used as the second field of
the gcc tuple, which is usually reserved for vendor use and not
appropriate as an ABI specifier. with this change, putting "x32" at
the end of the tuple, the way ABI specifiers are normally done, is
also permitted.
|
|
the omission of the padding was uncovered by the latest regression
statvfs regression test added to libc-test.
|
|
the incorrect error codes also made their way into errno when
__ptsname_r was called by plain ptsname, which reports errors via
errno rather than a return value.
|
|
Applications ended up with copy relocations for this array, which
resulted in libc's references to this array pointing to the
application's copy. The dynamic linker, however, can require this array
before the application is relocated, and therefore before the
application's copy of this array is initialized. This resulted in
garbage being loaded into FPSCR before executing main, which violated
the ABI.
We fix this by putting the array in crt1 and making the libc copy
private. This prevents libc's reference to the array from pointing to
an uninitialized copy in the application.
|
|
it's UB to fetch variadic args when none are passed, and this caused
real crashes on ppc due to its calling convention, which defines that
for variadic functions aggregate types be passed as pointers.
the assignment caused that pointer to get dereferenced, resulting in
a crash.
|
|
The mips statfs struct layout is different than on other archs, so the
statfs, fstatfs, statvfs and fstatvfs APIs were broken on mips.
Now the ordering is fixed, the types are kept consistent with other archs.
|
|
This used to be broken when all archs had the same semid_ds definition:
there is no padding around the time_t members on mips.
|
|
these were incorrectly copied from the kernel, whose ABI matches the
POSIX requirements but with the wrong underlying types and wrong
signedness.
|
|
these have been wrong for a long time and were never detected or
corrected. powerpc needs some gratuitous extra padding/reserved slots
in ipc_perm, big-endian ordering for the padding of time_t slots that
was intended by the kernel folks to allow a transition to 64-bit
time_t, and some minor gratuitous reordering of struct members.
|
|
the definition was found to be incorrect at least for powerpc, and
fixing this cleanly requires making the definition arch-specific. this
will allow cleaning up the definition for other archs to make it more
specific, and reversing some of the ugliness (time_t hacks) introduced
with the x32 port.
this first commit simply copies the existing definition to each arch
without any changes. this is intentional, to make it easier to review
changes made on a per-arch basis.
|
|
Remove non-constant aggregate initializer. (Still using long long, but
that is supported by ancient compilers without __extension__ anyway).
|
|
the printf floating point formatting code contains an optimization to
avoid computing digits that will be thrown away by rounding at the
specified (or default) precision. while it was correctly retaining all
places up to the last decimal place to be printed, it was not
retaining enough precision to see the next nonzero decimal place in
all cases. this could cause incorrect rounding down in round-to-even
(default) rounding mode, for example, when printing 0.5+DBL_EPSILON
with "%.0f".
in the fix, LDBL_MANT_DIG/3 is a lazy (non-sharp) upper bound on the
number of zeros between any two nonzero decimal digits.
|
|
empirically the overflow was an off-by-one, and it did not seem to be
overwriting meaningful data. rather than simply increasing the buffer
size by one, however, I have attempted to make the size obviously
correct in terms of bounds on the number of iterations for the loops
that fill the buffer. this still results in no more than a negligible
size increase of the buffer on the stack (6-7 32-bit slots) and is a
"safer" fix unless/until somebody wants to do the proof that a smaller
buffer would suffice.
|
|
this was problematic because several archs don't define __WORDSIZE. we
could add it, but I would rather phase this macro out in the long
term. in our version of the headers, UINTPTR_MAX is available here, so
just use it instead.
|
|
this seems to have been overlooked, and resulted in breakage in
anything including sys/user.h.
|
|
neither is correct; different commands take different argument types,
and some take no arguments at all. I have a much larger overhaul of
fcntl prepared to address this, but it's not appropriate to commit
during freeze.
the immediate problem being addressed affects forward-compatibility on
x32: if new commands are added and they take pointers, but the
libc-level fcntl function is not aware of them, using long would
sign-extend the pointer to 64 bits and give the kernel an invalid
pointer. on the kernel side, the argument to fcntl is always treated
as unsigned long, so no harm is done by treating possibly-signed
integer arguments as unsigned. for every command that takes an integer
argument except for F_SETOWN, large integer arguments and negative
arguments are handled identically anyway. in the case of F_SETOWN, the
kernel is responsible for converting the argument which it received as
unsigned long to int, so the sign of negative arguments is recovered.
the other problem that will be addressed later is that the type passed
to va_arg does not match the type in the caller of fcntl. an advanced
compiler doing cross-translation-unit analysis could potentially see
this mismatch and issue warnings or otherwise make trouble.
on i386, this patch was confirmed not to alter the code generated by
gcc 4.7.3. in principle the generated code should not be affected on
any arch except x32.
|
|
|
|
the kernel uses long longs in the struct, but the documentation
says they're long. so we need to fixup the mismatch between the
userspace and kernelspace structs.
since the struct offers a mem_unit member, we can avoid truncation
by adjusting that value.
|
|
if we ever encounter other targets where error codes don't fit in the
8-bit range, the table should probably just be bumped to 16-bit, but
for now I don't want to increase the table size on all archs just
because of a bug in the mips abi.
|
|
most notably, it was failing to match sh4-*, etc., but in general the
explicit matching of hyphens for some archs was problematic because it
failed to accept simply the musl-style arch name (without a gcc-style
tuple) as an input. the original motivation of matching hyphens was to
prevent incorrectly identifying a 64-bit arch as the corresponding
32-bit arch (e.g. mips* matching mips64) but this is easily fixed by
simply checking (and for now, rejecting as unsupported) the relevant
64-bit archs.
|
|
|
|
|
|
|
|
default endianness for sh on linux is little, and while conventions
vary, "eb" seems to be the most widely used suffix for big endian.
|
|
linux, gcc, etc. all use "sh" as the name for the superh arch. there
was already some inconsistency internally in musl: the dynamic linker
was searching for "ld-musl-sh.path" as its path file despite its own
name being "ld-musl-superh.so.1". there was some sentiment in both
directions as to how to resolve the inconsistency, but overall "sh"
was favored.
|
|
per POSIX, ENOENT is reserved for invalid stream position; it is an
optional error and would only happen if the application performs
invalid seeks on the underlying file descriptor. however, linux's
getdents syscall also returns ENOENT if the directory was removed
between the time it was opened and the time of the read. we need to
catch this case and remap it to simple end-of-file condition (null
pointer return value like an error, but no change to errno). this
issue reportedly affects GNU make in certain corner cases.
rather than backing up and restoring errno, I've just changed the
syscall to be made in a way that doesn't affect errno (via an inline
syscall rather than a call to the __getdents function). the latter
still exists for the purpose of providing the public getdents alias
which sets errno.
|