| Age | Commit message (Collapse) | Author | Lines |
|---|
|
kernel connection multiplexor macros AF_KCM, PF_KCM, SOL_KCM were
added in linux commit ab7ac4eb9832e32a09f4e8042705484d2fb0aad3
MSG_BATCH sendmsg flag for performance optimization was added
in linux commit f092276d85b82504e8a07498f4e9e0c51f06745c
SOL_* macros are now synced with linux socket.h which is not a uapi
header and glibc did not have the macros either, but that has changed
http://sourceware.org/ml/libc-alpha/2016-05/msg00322.html
|
|
new fields and associated linux commit:
tcpi_notsent_bytes, tcpi_min_rtt cd9b266095f422267bddbec88f9098b48ea548fc
tcpi_data_segs_in, tcpi_data_segs_out a44d6eacdaf56f74fad699af7f4925a5f5ac0e7f
|
|
flag for new cgroup namespace, added in linux commit
5e2bec7c2248ae27c5b16cd97215ae05c1d39179
|
|
x86 protection key faults are reported in the si_pkey field,
added in linux commit cd0ea35ff5511cde299a61c21a95889b4a71464e
|
|
ethertype for macsec added in linux commit
dece8d2b78d19df7fe5e4e965f1f0d1a3e188d1b
|
|
new socket option so application can give advice about routing
path quality of connected udp sockets, added in linux commit
a87cb3e48ee86d29868d3f59cfb9ce1a8fa63314
|
|
the syscalls take an additional flag argument, they were added in commit
f17d8b35452cab31a70d224964cd583fb2845449 and a RWF_HIPRI priority hint
flag was added to linux/fs.h in 97be7ebe53915af504fb491fb99f064c7cf3cb09.
the syscall is not allocated for microblaze and sh yet.
|
|
the difference of pointers is a signed type ptrdiff_t; if it is only
32-bit, left-shifting it by 30 bits produces undefined behavior. cast
the difference to an appropriate unsigned type, uint32_t, before
shifting to avoid this.
the a64l function is specified to return a signed 32-bit result in
type long. as noted in the bug report by Ed Schouten, converting
implicitly from uint32_t only produces the desired result when long is
a 32-bit type. since the computation has to be done in unsigned
arithmetic to avoid overflow, simply cast the result to int32_t.
further, POSIX leaves the behavior on invalid input unspecified but
not undefined, so we should not take the difference between the
potentially-null result of strchr and the base pointer without first
checking the result. the simplest behavior is just returning the
partial conversion already performed in this case, so do that.
|
|
previously, the only way the stopping condition could be met with
correct lengths in the headers invoked undefined behavior, adding
sizeof(struct cmsghdr) beyond the end of the cmsg buffer.
instead, compute and compare sizes rather than pointers.
|
|
the num_submatches field of some ast nodes was not initialized in
tre_add_tag_{left,right}, but was accessed later.
this was a benign bug since the uninitialized values were never used
(these values are created during tre_add_tags and copied around during
tre_expand_ast where they are also used in computations, but nothing
in the final tnfa depends on them).
|
|
|
|
|
|
These system calls are already all remapped in an arch-agnostic manner in
src/internal/syscall.h
|
|
|
|
|
|
The --build flag is listed in two case statement entries in configure,
which causes the second entry to be ignored. This patch removes it
from the first entry.
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
|
|
previously if you called getprotobyname("egp") you would get
NULL because \008 is invalid octal and so the protocol id was
interpreted as 0 and name as "8egp".
|
|
the standard configure interface, which our configure script tries to
implement, identifies cross compiling (build != host) and searches for
the properly-prefixed cross tools. our script was not doing that,
forcing users to explicitly provide either CC or a CROSS_COMPILE tool
prefix, and the more common choice, just providing CC, was incomplete
because the Makefile would still invoke the native ar and ranlib
programs. this happened to work when building on ELF-based systems
with GNU binutils, but could easily fail when cross-compiling from
dissimilar systems.
like before, and like the standard configure behavior, an explicit CC
or CROSS_COMPILE variable on the command line or in the environment
overrides the automatic prefixing.
|
|
these changes are the outcome of a long mailing list thread that took
place March 2016, "musl licensing". among minor other issues,
prospective users were not confident that the whole-project MIT
license would grant permission for files to which the COPYRIGHT file
expressed a belief that copyright not apply, if it turned out that
these files were actually subject to copyright.
in accordance with the original intent of applying a permissive
license to the project, which was that license issues not be an
obstacle to use, the text which was causing confusion is removed. no
new claims of copyright are made, but new text is added to clarify
that the grant of permissions applies to all files, and an explicit
grant of permission to use public headers and crt files without
attribution has been made.
this patch was reviewed and approved by all substantial contributors
to the affected files: Bobby Bingham, John Spencer (rofl0r), Nicholas
J. Kain, Rich Felker, Richard Pennington, Stefan Kristiansson, and
Szabolcs Nagy.
|
|
commit 7e816a6487932cbb3cb71d94b609e50e81f4e5bf (version 1.1.11
release cycle) moved the code that performs wchar_t to multibyte
conversion across code that used the resulting length in bytes,
thereby breaking the unget buffer space check in ungetwc and
clobbering up to three bytes below the start of the buffer.
for allocated FILEs (all read-enabled FILEs except stdin), the
underflow clobbers at most the FILE-specific locale pointer. no stores
are performed through this pointer, but subsequent loads may result in
a crash or mismatching encoding rule (UTF-8 multibyte vs byte-based).
for stdin, the buffer lies in .bss and the underflow may clobber
another object. in practice, for libc.so the adjacent object seems to
be stderr's buffer, which is completely unused, but this could vary
with linking options, or when static linking.
applications which do not attempt to use more than one character of
ungetwc pushback, or which do not use ungetwc, are not affected.
|
|
per the powerpc psabi, offset 4 of the stack at call time belongs to
the callee and is used for spilling lr (return address). in addition,
offset 0 on the stack must contain a pointer to the previous stack
frame, or a null pointer for the initial stack frame of a thread.
__clone failed to setup any stack frame on the new thread's stack,
thereby allowing the start function it called to clobber offset 4 of
the new thread's struct __pthread, which contains the dtv pointer.
add code to setup a proper stack frame and align the stack pointer to
a multiple of 16 (also an abi requirement) if it was not already
aligned.
|
|
The variable nss is set to zero in following line.
|
|
based on patch submitted by Jaydeep Patil, with minor changes.
|
|
mips32r6 and mips64r6 are actually new isas at both the asm source and
opcode levels (pre-r6 code cannot run on r6) and thus need to be
treated as a new subarch. the following changes are made, some of
which yield code generation improvements for non-r6 targets too:
- add subarch logic in configure script and reloc.h files for dynamic
linker name.
- suppress use of .set mips2 asm directives (used to allow mips2
atomic instructions on baseline mips1 builds; the kernel has to
emulate them on mips1) except when actually needed. they cause wrong
instruction encodings on r6, and pessimize inlining on at least some
compilers.
- only hard-code sync instruction encoding on mips1.
- use "ZC" constraint instead of "m" constraint for llsc memory
operands on r6, where the ll/sc instructions no longer accept full
16-bit offsets.
- only hard-code rdhwr instruction encoding with .word on targets
(pre-r2) where it may need trap-and-emulate by the kernel.
otherwise, just use the instruction mnemonic, and allow an arbitrary
destination register to be used.
|
|
the two/three/four byte memmem specializations are not prepared to
handle haystacks shorter than the needle; they unconditionally read at
least up to the needle length and subtract from the haystack length.
if the haystack is shorter, the remaining haystack length underflows
and produces an unbounded search which will eventually either crash or
find a spurious match.
the top-level memmem function attempted to avoid this case already by
checking for haystack shorter than needle, but it failed to re-check
after using memchr to remove the maximal prefix not containing the
first byte of the needle.
|
|
commits e24984efd5c6ac5ea8e6cb6cd914fa8435d458bc and
16b55298dc4b6a54d287d7494e04542667ef8861 inadvertently disabled the
a_spin implementations for i386, x86_64, and x32 by defining a macro
named a_pause instead of a_spin. this should not have caused any
functional regression, but it inhibited cpu relaxation while spinning
for locks.
bug reported by George Kulakowski.
|
|
the comparison f->wpos > f->buf has undefined behavior when f->wpos is
a null pointer, despite the intuition (and actual compiler behavior,
for all known compilers) being that NULL > ptr is false for all valid
pointers ptr.
the purpose of the comparison is to determine if the write buffer is
non-empty, and the idiom used elsewhere for that is comparison against
f->wbase, which is either a null pointer when not writing, or equal to
f->buf when writing. in the former case, both f->wpos and f->wbase are
null; in the latter they are both non-null and point into the same
array.
|
|
|
|
allows the os to free the marked pages lazily on memory pressure.
expected to increase malloc performance.
new in linux commit 854e9ed09dedf0c19ac8640e91bcc74bc3f9e5c9
|
|
new flag for exclusive wakeup mode when an event source fd is attached
to multiple epoll fds but they should not all receive the events.
new in linux commit df0108c5da561c66c333bb46bfe3c1fc65905898
|
|
new socket options for setting classic or extended BPF program
for sockets in a SO_REUSEPORT group. added in linux commit
538950a1b7527a0a52ccd9337e3fcd304f027f13
|
|
new in linux commit 715f504b118998c41a2079a17e16bf5a8a114885
same as IP_HDRINCL but for SOL_IPV6 sockets.
|
|
it was introduced for offloading copying between regular files
in linux commit 29732938a6289a15e907da234d6692a2ead71855
(microblaze and sh does not yet have the syscall number.)
|
|
add userfaultfd, membarrier and mlock2 system call numbers.
|
|
|
|
currently five targets use the same mman.h constants and the rest
share most constants too, so move them to sys/mman.h before the
bits/mman.h include where the differences can be corrected by
redefinition of the macros.
this fixes two minor bugs: POSIX_MADV_DONTNEED was wrong on most
targets (it should be the same as MADV_DONTNEED), and sh defined
the x86-only MAP_32BIT mmap flag.
|
|
the idiom fprintf(f, "%.*s", n, "") was wrongly used in vfwprintf as a
means of producing n spaces; instead it produces no output. the
correct form is fprintf(f, "%*s", n, ""), using width instead of
precision, since for %s the later is a maximum rather than a minimum.
|
|
these changes should not affect generated code, but they reflect that
the underlying objects operated on by a_cas_p are supposed to have
type volatile void *, not volatile long. in theory a compiler could
treat the effective type mismatch in the "m" memory operands as
undefined behavior.
|
|
apparently clang does not accept matching-register input and output
constraints that differ in size (32-bit vs 64-bit).
based on patch by Jaydeep Patil.
|
|
the SPE ABI may be compatible with soft-float, but actually making it
work requires some additional work, so for now it's best to make sure
broken builds don't happen.
|
|
Some PowerPC CPUs (e.g. Freescale MPC85xx) have a completely different
instruction set for floating point operations (SPE).
Executing regular PowerPC floating point instructions results in
"Illegal instruction" errors.
Make it possible to run these devices in soft-float mode.
|
|
This is the minimal fix for __putenv leaving a pointer to freed heap
storage in __env_map array, which could later on lead to errors such
as double-free.
|
|
|
|
patch by Mahesh Bodapati and Jaydeep Patil of Imagination
Technologies.
|
|
this change is made in preparation for adding the mips64 port, which
needs a 64-bit (and mips64-specific) form of the R_INFO macro, but
it's a better abstraction anyway.
based on part of the mips64 port patch by Mahesh Bodapati and Jaydeep
Patil of Imagination Technologies.
|
|
expf(-NAN) was treated as expf(-large) which unconditionally
returns +0, so special case +-NAN.
reported by Petr Hosek.
|
|
This brings the call to an actually usable speed.
Quick unscientific benchmark: 14ns : 102ns :: vDSO : syscall
|
|
This is a GNU extension, but a fairly minor one, for a system call that
otherwise has no libc wrapper.
|
|
This is a workaround to treat * as literal * at the start of a BRE.
Ideally ^ would be treated as an anchor at the start of any BRE
subexpression and similarly $ would be an anchor at the end of any
subexpression. This is not required by the standard and hard to do
with the current code, but it's the existing practice. If it is
changed, * should be treated as literal after such anchor as well.
|
|
commit 7eaa76fc2e7993582989d3838b1ac32dd8abac09 made * invalid at
the start of a BRE subexpression, but it should be accepted as
literal * there according to the standard.
This patch does not fix subexpressions starting with ^*.
|
