#include <fenv.h>
#include "libm.h"
#if LDBL_MANT_DIG==64 && LDBL_MAX_EXP==16384
union ld80 {
long double x;
struct {
uint64_t m;
uint16_t e : 15;
uint16_t s : 1;
uint16_t pad;
} bits;
};
/* exact add, assumes exponent_x >= exponent_y */
static void add(long double *hi, long double *lo, long double x, long double y)
{
long double r;
r = x + y;
*hi = r;
r -= x;
*lo = y - r;
}
/* exact mul, assumes no over/underflow */
static void mul(long double *hi, long double *lo, long double x, long double y)
{
static const long double c = 1.0 + 0x1p32L;
long double cx, xh, xl, cy, yh, yl;
cx = c*x;
xh = (x - cx) + cx;
xl = x - xh;
cy = c*y;
yh = (y - cy) + cy;
yl = y - yh;
*hi = x*y;
*lo = (xh*yh - *hi) + xh*yl + xl*yh + xl*yl;
}
/*
assume (long double)(hi+lo) == hi
return an adjusted hi so that rounding it to double (or less) precision is correct
*/
static long double adjust(long double hi, long double lo)
{
union ld80 uhi, ulo;
if (lo == 0)
return hi;
uhi.x = hi;
if (uhi.bits.m & 0x3ff)
return hi;
ulo.x = lo;
if (uhi.bits.s == ulo.bits.s)
uhi.bits.m++;
else {
uhi.bits.m--;
/* handle underflow and take care of ld80 implicit msb */
if (uhi.bits.m == (uint64_t)-1/2) {
uhi.bits.m *= 2;
uhi.bits.e--;
}
}
return uhi.x;
}
/* adjusted add so the result is correct when rounded to double (or less) precision */
static long double dadd(long double x, long double y)
{
add(&x, &y, x, y);
return adjust(x, y);
}
/* adjusted mul so the result is correct when rounded to double (or less) precision */
static long double dmul(long double x, long double y)
{
mul(&x, &y, x, y);
return adjust(x, y);
}
static int getexp(long double x)
{
union ld80 u;
u.x = x;
return u.bits.e;
}
double fma(double x, double y, double z)
{
#pragma STDC FENV_ACCESS ON
long double hi, lo1, lo2, xy;
int round, ez, exy;
/* handle +-inf,nan */
if (!isfinite(x) || !isfinite(y))
return x*y + z;
if (!isfinite(z))
return z;
/* handle +-0 */
if (x == 0.0 || y == 0.0)
return x*y + z;
round = fegetround();
if (z == 0.0) {
if (round == FE_TONEAREST)
return dmul(x, y);
return x*y;
}
/* exact mul and add require nearest rounding */
/* spurious inexact exceptions may be raised */
fesetround(FE_TONEAREST);
mul(&xy, &lo1, x, y);
exy = getexp(xy);
ez = getexp(z);
if (ez > exy) {
add(&hi, &lo2, z, xy);
} else if (ez > exy - 12) {
add(&hi, &lo2, xy, z);
if (hi == 0) {
fesetround(round);
/* make sure that the sign of 0 is correct */
return (xy + z) + lo1;
}
} else {
/*
ez <= exy - 12
the 12 extra bits (1guard, 11round+sticky) are needed so with
lo = dadd(lo1, lo2)
elo <= ehi - 11, and we use the last 10 bits in adjust so
dadd(hi, lo)
gives correct result when rounded to double
*/
hi = xy;
lo2 = z;
}
fesetround(round);
if (round == FE_TONEAREST)
return dadd(hi, dadd(lo1, lo2));
return hi + (lo1 + lo2);
}
#else
/* origin: FreeBSD /usr/src/lib/msun/src/s_fma.c */
/*-
* Copyright (c) 2005-2011 David Schultz <das@FreeBSD.ORG>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* A struct dd represents a floating-point number with twice the precision
* of a double. We maintain the invariant that "hi" stores the 53 high-order
* bits of the result.
*/
struct dd {
double hi;
double lo;
};
/*
* Compute a+b exactly, returning the exact result in a struct dd. We assume
* that both a and b are finite, but make no assumptions about their relative
* magnitudes.
*/
static inline struct dd dd_add(double a, double b)
{
struct dd ret;
double s;
ret.hi = a + b;
s = ret.hi - a;
ret.lo = (a - (ret.hi - s)) + (b - s);
return (ret);
}
/*
* Compute a+b, with a small tweak: The least significant bit of the
* result is adjusted into a sticky bit summarizing all the bits that
* were lost to rounding. This adjustment negates the effects of double
* rounding when the result is added to another number with a higher
* exponent. For an explanation of round and sticky bits, see any reference
* on FPU design, e.g.,
*
* J. Coonen. An Implementation Guide to a Proposed Standard for
* Floating-Point Arithmetic. Computer, vol. 13, no. 1, Jan 1980.
*/
static inline double add_adjusted(double a, double b)
{
struct dd sum;
uint64_t hibits, lobits;
sum = dd_add(a, b);
if (sum.lo != 0) {
EXTRACT_WORD64(hibits, sum.hi);
if ((hibits & 1) == 0) {
/* hibits += (int)copysign(1.0, sum.hi * sum.lo) */
EXTRACT_WORD64(lobits, sum.lo);
hibits += 1 - ((hibits ^ lobits) >> 62);
INSERT_WORD64(sum.hi, hibits);
}
}
return (sum.hi);
}
/*
* Compute ldexp(a+b, scale) with a single rounding error. It is assumed
* that the result will be subnormal, and care is taken to ensure that
* double rounding does not occur.
*/
static inline double add_and_denormalize(double a, double b, int scale)
{
struct dd sum;
uint64_t hibits, lobits;
int bits_lost;
sum = dd_add(a, b);
/*
* If we are losing at least two bits of accuracy to denormalization,
* then the first lost bit becomes a round bit, and we adjust the
* lowest bit of sum.hi to make it a sticky bit summarizing all the
* bits in sum.lo. With the sticky bit adjusted, the hardware will
* break any ties in the correct direction.
*
* If we are losing only one bit to denormalization, however, we must
* break the ties manually.
*/
if (sum.lo != 0) {
EXTRACT_WORD64(hibits, sum.hi);
bits_lost = -((int)(hibits >> 52) & 0x7ff) - scale + 1;
if (bits_lost != 1 ^ (int)(hibits & 1)) {
/* hibits += (int)copysign(1.0, sum.hi * sum.lo) */
EXTRACT_WORD64(lobits, sum.lo);
hibits += 1 - (((hibits ^ lobits) >> 62) & 2);
INSERT_WORD64(sum.hi, hibits);
}
}
return scalbn(sum.hi, scale);
}
/*
* Compute a*b exactly, returning the exact result in a struct dd. We assume
* that both a and b are normalized, so no underflow or overflow will occur.
* The current rounding mode must be round-to-nearest.
*/
static inline struct dd dd_mul(double a, double b)
{
static const double split = 0x1p27 + 1.0;
struct dd ret;
double ha, hb, la, lb, p, q;
p = a * split;
ha = a - p;
ha += p;
la = a - ha;
p = b * split;
hb = b - p;
hb += p;
lb = b - hb;
p = ha * hb;
q = ha * lb + la * hb;
ret.hi = p + q;
ret.lo = p - ret.hi + q + la * lb;
return (ret);
}
/*
* Fused multiply-add: Compute x * y + z with a single rounding error.
*
* We use scaling to avoid overflow/underflow, along with the
* canonical precision-doubling technique adapted from:
*
* Dekker, T. A Floating-Point Technique for Extending the
* Available Precision. Numer. Math. 18, 224-242 (1971).
*
* This algorithm is sensitive to the rounding precision. FPUs such
* as the i387 must be set in double-precision mode if variables are
* to be stored in FP registers in order to avoid incorrect results.
* This is the default on FreeBSD, but not on many other systems.
*
* Hardware instructions should be used on architectures that support it,
* since this implementation will likely be several times slower.
*/
double fma(double x, double y, double z)
{
#pragma STDC FENV_ACCESS ON
double xs, ys, zs, adj;
struct dd xy, r;
int oround;
int ex, ey, ez;
int spread;
/*
* Handle special cases. The order of operations and the particular
* return values here are crucial in handling special cases involving
* infinities, NaNs, overflows, and signed zeroes correctly.
*/
if (!isfinite(x) || !isfinite(y))
return (x * y + z);
if (!isfinite(z))
return (z);
if (x == 0.0 || y == 0.0)
return (x * y + z);
if (z == 0.0)
return (x * y);
xs = frexp(x, &ex);
ys = frexp(y, &ey);
zs = frexp(z, &ez);
oround = fegetround();
spread = ex + ey - ez;
/*
* If x * y and z are many orders of magnitude apart, the scaling
* will overflow, so we handle these cases specially. Rounding
* modes other than FE_TONEAREST are painful.
*/
if (spread < -DBL_MANT_DIG) {
#ifdef FE_INEXACT
feraiseexcept(FE_INEXACT);
#endif
#ifdef FE_UNDERFLOW
if (!isnormal(z))
feraiseexcept(FE_UNDERFLOW);
#endif
switch (oround) {
default: /* FE_TONEAREST */
return (z);
#ifdef FE_TOWARDZERO
case FE_TOWARDZERO:
if (x > 0.0 ^ y < 0.0 ^ z < 0.0)
return (z);
else
return (nextafter(z, 0));
#endif
#ifdef FE_DOWNWARD
case FE_DOWNWARD:
if (x > 0.0 ^ y < 0.0)
return (z);
else
return (nextafter(z, -INFINITY));
#endif
#ifdef FE_UPWARD
case FE_UPWARD:
if (x > 0.0 ^ y < 0.0)
return (nextafter(z, INFINITY));
else
return (z);
#endif
}
}
if (spread <= DBL_MANT_DIG * 2)
zs = scalbn(zs, -spread);
else
zs = copysign(DBL_MIN, zs);
fesetround(FE_TONEAREST);
/*
* Basic approach for round-to-nearest:
*
* (xy.hi, xy.lo) = x * y (exact)
* (r.hi, r.lo) = xy.hi + z (exact)
* adj = xy.lo + r.lo (inexact; low bit is sticky)
* result = r.hi + adj (correctly rounded)
*/
xy = dd_mul(xs, ys);
r = dd_add(xy.hi, zs);
spread = ex + ey;
if (r.hi == 0.0) {
/*
* When the addends cancel to 0, ensure that the result has
* the correct sign.
*/
fesetround(oround);
volatile double vzs = zs; /* XXX gcc CSE bug workaround */
return xy.hi + vzs + scalbn(xy.lo, spread);
}
if (oround != FE_TONEAREST) {
/*
* There is no need to worry about double rounding in directed
* rounding modes.
*/
fesetround(oround);
adj = r.lo + xy.lo;
return scalbn(r.hi + adj, spread);
}
adj = add_adjusted(r.lo, xy.lo);
if (spread + ilogb(r.hi) > -1023)
return scalbn(r.hi + adj, spread);
else
return add_and_denormalize(r.hi, adj, spread);
}
#endif