Age | Commit message (Collapse) | Author | Lines |
|
common part of erf and erfc was put in a separate function which
saved some space and the new code is using unsigned arithmetics
erfcf had a bug: for some inputs in [7.95,8] the result had
more than 60ulp error: in expf(-z*z - 0.5625f) the argument
must be exact but not enough lowbits of z were zeroed,
-SET_FLOAT_WORD(z, ix&0xfffff000);
+SET_FLOAT_WORD(z, ix&0xffffe000);
fixed the issue
|
|
both jn and yn functions had integer overflow issues for large
and small n
to handle these issues nm1 (== |n|-1) is used instead of n and -n
in the code and some loops are changed to make sure the iteration
counter does not overflow
(another solution could be to use larger integer type or even double
but that has more size and runtime cost, on x87 loading int64_t or
even uint32_t into an fpu register is more than two times slower than
loading int32_t, and using double for n slows down iteration logic)
yn(-1,0) now returns inf
posix2008 specifies that on overflow and at +-0 all y0,y1,yn functions
return -inf, this is not consistent with math when n<0 odd integer in yn
(eg. when x->0, yn(-1,x)->inf, but historically yn(-1,0) seems to be
special cased and returned -inf)
some threshold values in jnf and ynf were fixed that seems to be
incorrectly copy-pasted from the double version
|
|
a common code path in j1 and y1 was factored out so the resulting
object code is a bit smaller
unsigned int arithmetics is used for bit manipulation
j1(-inf) now returns 0 instead of -0
an incorrect threshold in the common code of j1f and y1f got fixed
(this caused spurious overflow and underflow exceptions)
the else branch in pone and pzero functions are fixed
(so code analyzers dont warn about uninitialized values)
|
|
a common code path in j0 and y0 was factored out so the resulting
object code is smaller
unsigned int arithmetics is used for bit manipulation
the logic of j0 got a bit simplified (x < 1 case was handled
separately with a bit higher precision than now, but there are large
errors in other domains anyway so that branch has been removed)
some threshold values were adjusted in j0f and y0f
|
|
previously 0x1p-1000 and 0x1p1000 was used for raising inexact
exception like x+tiny (when x is big) or x+huge (when x is small)
the rational is that these float consts are large enough
(0x1p-120 + 1 raises inexact even on ld128 which has 113 mant bits)
and float consts maybe smaller or easier to load on some platforms
(on i386 this reduced the object file size by 4bytes in some cases)
|
|
this is not a full rewrite just fixes to the special case logic:
+-0 and non-integer x<INT_MIN inputs incorrectly raised invalid
exception and for +-0 the return value was wrong
so integer test and odd/even test for negative inputs are changed
and a useless overflow test was removed
|
|
comments are kept in the double version of the function
compared to fdlibm/freebsd we partition the domain into one
more part and select different threshold points:
now the [log(5/3)/2,log(3)/2] and [log(3)/2,inf] domains
should have <1.5ulp error
(so only the last bit may be wrong, assuming good exp, expm1)
(note that log(3)/2 and log(5/3)/2 are the points where tanh
changes resolution: tanh(log(3)/2)=0.5, tanh(log(5/3)/2)=0.25)
for some x < log(5/3)/2 (~=0.2554) the error can be >1.5ulp
but it should be <2ulp
(the freebsd code had some >2ulp errors in [0.255,1])
even with the extra logic the new code produces smaller
object files
|
|
comments are kept in the double version of the function
|
|
changed the algorithm: large input is not special cased
(when exp(-x) is small compared to exp(x))
and the threshold values are reevaluated
(fdlibm code had a log(2)/2 cutoff for which i could not find
justification, log(2) seems to be a better threshold and this
was verified empirically)
the new code is simpler, makes smaller binaries and should be
faster for common cases
the old comments were removed as they are no longer true for the
new algorithm and the fdlibm copyright was dropped as well
because there is no common code or idea with the original anymore
except for trivial ones.
|
|
|
|
|
|
with naive exp2l(x*log2e) the last 12bits of the result was incorrect
for x with large absolute value
with hi + lo = x*log2e is caluclated to 128 bits precision and then
expl(x) = exp2l(hi) + exp2l(hi) * f2xm1(lo)
this gives <1.5ulp measured error everywhere in nearest rounding mode
|
|
uses the lanczos approximation method with the usual tweaks.
same parameters were selected as in boost and python.
(avoides some extra work and special casing found in boost
so the precision is not that good: measured error is <5ulp for
positive x and <10ulp for negative)
an alternative lgamma_r implementation is also given in the same
file which is simpler and smaller than the current one, but less
precise so it's ifdefed out for now.
|
|
do fabs by hand, don't check for nan and inf separately
|
|
|
|
__invtrigl is not needed when acosl, asinl, atanl have asm
implementations
|
|
modifications:
* avoid unsigned->signed conversions
* removed various volatile hacks
* use FORCE_EVAL when evaluating only for side-effects
* factor out R() rational approximation instead of manual inline
* __invtrigl.h now only provides __invtrigl_R, __pio2_hi and __pio2_lo
* use 2*pio2_hi, 2*pio2_lo instead of pi_hi, pi_lo
otherwise the logic is not changed, long double versions will
need a revisit when a genaral long double cleanup happens
|
|
modifications:
* avoid unsigned->signed integer conversion
* do not handle special cases when they work correctly anyway
* more strict threshold values (0x1p26 instead of 0x1p28 etc)
* smaller code, cleaner branching logic
* same precision as the old code:
acosh(x) has up to 2ulp error in [1,1.125]
asinh(x) has up to 1.6ulp error in [0.125,0.5], [-0.5,-0.125]
atanh(x) has up to 1.7ulp error in [0.125,0.5], [-0.5,-0.125]
|
|
|
|
use the 'f' suffix when a float constant is not representable
|
|
raise overflow and underflow when necessary, fix various comments.
|
|
similar to exp.c cleanup: use scalbnf, don't return excess precision,
drop some optimizatoins.
exp.c was changed to be more consistent with expf.c code.
|
|
* old code relied on sign extension on right shift
* exp2l ld64 wrapper was wrong
* use scalbn instead of bithacks
|
|
overflow and underflow was incorrect when the result was not stored.
an optimization for the 0.5*ln2 < |x| < 1.5*ln2 domain was removed.
did various cleanups around static constants and made the comments
consistent with the code.
|
|
keeping only commonly used data in invtrigl
|
|
this also fixes overflow/underflow raising and excess
precision issues (as those are handled well in scalbn)
|
|
|
|
old code was correct only if the result was stored (without the
excess precision) or musl was compiled with -ffloat-store.
now we use STRICT_ASSIGN to work around the issue.
(see note 160 in c11 section 6.8.6.4)
|
|
old code was correct only if the result was stored (without the
excess precision) or musl was compiled with -ffloat-store.
(see note 160 in n1570.pdf section 6.8.6.4)
|
|
old code (return x+x;) returns correct value and raises correct
flags only if the result is stored as double (or float)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
this function never existed historically; since the float/double
functions it's based on are nonstandard and deprecated, there's really
no justification for its existence except that glibc has it. it can be
added back if there's ever really a need...
|
|
|
|
exp(inf), exp(-inf), exp(nan) used to raise wrong flags
|
|
|
|
|
|
The long double adjustment was wrong:
The usual check is
mant_bits & 0x7ff == 0x400
before doing a mant_bits++ or mant_bits-- adjustment since
this is the only case when rounding an inexact ld80 into
double can go wrong. (only in nearest rounding mode)
After such a check the ++ and -- is ok (the mantissa will end
in 0x401 or 0x3ff).
fma is a bit different (we need to add 3 numbers with correct
rounding: hi_xy + lo_xy + z so we should survive two roundings
at different places without precision loss)
The adjustment in fma only checks for zero low bits
mant_bits & 0x3ff == 0
this way the adjusted value is correct when rounded to
double or *less* precision.
(this is an important piece in the fma puzzle)
Unfortunately in this case the -- is not a correct adjustment
because mant_bits might underflow so further checks are needed
and this was the source of the bug.
|
|
this is silly, but it makes apps that read binary junk and interpret
it as ld80 "safer", and it gets gnulib to stop replacing printf...
|
|
this was fixed previously on i386 but the corresponding code on x86_64
was missed.
|
|
backported fix from freebsd:
http://svnweb.FreeBSD.org/base?view=revision&revision=233973
|
|
|
|
updated nextafter* to use FORCE_EVAL, it can be used in many other
places in the math code to improve readability.
|
|
apparently initializing a variable is not "using" it but assigning to
it is "using" it. i don't really like this fix, but it's better than
trying to make a bigger cleanup just before a release, and it should
work fine (tested against nsz's math tests).
|