| Age | Commit message (Collapse) | Author | Lines |
|---|
|
j is int32_t and thus j<<31 is undefined if j==1, so j is changed to
uint32_t locally as a quick fix, the generated code is not affected.
(this is a strict conformance fix, future c standard may allow 1<<31,
see DR 463. the bug was inherited from freebsd fdlibm, the proper fix
is to use uint32_t for all bit hacks, but that requires more intrusive
changes.)
reported by Daniel Sabogal
|
|
there was a copy paste error that could cause large ulp errors
in atan2l, atanl, asinl and acosl on aarch64, mips64 and mipsn32.
(the implementation is from freebsd fdlibm, but the tail end
of the polynomial was wrong. 128 bit long double functions
are not yet tested so this went undetected.)
|
|
expf(-NAN) was treated as expf(-large) which unconditionally
returns +0, so special case +-NAN.
reported by Petr Hosek.
|
|
commit e4355bd6bec89688e8c739cd7b4c76e675643dca moved the math asm
from external source files to inline asm, but unfortunately, all
current releases of clang use the wrong inline asm constraint codes
for float and double ("w" and "P" instead of "t" and "w",
respectively). this patch adds detection for the bug in configure,
and, for now, just disables the affected asm on broken clang versions.
|
|
in order to take advantage of the fpu in -mfloat-abi=softfp mode, the
__VFP_FP__ (presence of vfp fpu) was checked instead of checking for
__ARM_PCS_VFP (hardfloat EABI variant). however, the latter macro is
the one that's actually specified by the ABI documents rather than
being compiler-specific, and should also be checked in case __VFP_FP__
is not defined on some compilers or some configurations.
|
|
this makes it possible to inline them with LTO, and is the simplest
approach to eliminating the use of .sub files.
this also makes VFP sqrt available for use with the standard EABI
(plain arm rather than armhf subarch) when libc is built with
-mfloat-abi=softfp. the same could have been done for fabs, but when
the argument and return value are in integer registers, moving to VFP
registers and back is almost certainly more costly than a simple
integer operation.
|
|
a conforming compiler for an arch with excess precision floating point
(FLT_EVAL_METHOD!=0; presently i386 is the only such arch supported)
computes all intermediate results in the types float_t and double_t
rather than the nominal type of the expression. some incorrect
compilers, however, only keep excess precision in registers, and
convert down to the nominal type when spilling intermediate results to
memory, yielding unpredictable results that depend on the compiler's
choices of what/when to spill. in particular, this happens on old gcc
versions with -ffloat-store, which we need in order to work around
bugs where the compiler wrongly keeps explicitly-dropped excess
precision.
by explicitly converting to double_t where expressions are expected be
be evaluated in double_t precision, we can avoid depending on the
compiler to get types correct when spilling; the nominal and
intermediate precision now match. this commit should not change the
code generated by correct compilers, or by old ones on non-i386 archs
where double_t is defined as double.
this fixes a serious bug in argument reduction observed on i386 with
gcc 4.2: for values of x outside the unit circle, sin(x) was producing
results outside the interval [-1,1]. changes made in commit
0ce946cf808274c2d6e5419b139e130c8ad4bd30 were likely responsible for
breaking compatibility with this and other old gcc versions.
patch by Szabolcs Nagy.
|
|
these files are all accepted as legacy arm syntax when producing arm
code, but legacy syntax cannot be used for producing thumb2 with
access to the full ISA. even after switching to UAL, some asm source
files contain instructions which are not valid in thumb mode, so these
will need to be addressed separately.
|
|
Some armhf gcc toolchains (built with --with-float=hard but without
--with-fpu=vfp*) do not pass -mfpu=vfp to the assembler and then
binutils rejects the UAL mnemonics for VFP unless there is an .fpu vfp
directive in the asm source.
|
|
the implicit-operand form of fucomip is rejected by binutils 2.19 and
perhaps other versions still in use. writing both operands explicitly
fixes the issue. there is no change to the resulting output.
commit a732e80d33b4fd6f510f7cec4f5573ef5d89bc4e was the source of this
regression.
|
|
analogous to commit 8ed66ecbcba1dd0f899f22b534aac92a282f42d5 for i386.
|
|
none of these are actual textrels because of ld-time binding performed
by -Bsymbolic-functions, but I'm changing them with the goal of making
ld-time binding purely an optimization rather than relying on it for
semantic purposes.
in the case of memmove's call to memcpy, making it explicit that the
memmove asm is assuming the forward-copying behavior of the memcpy asm
is desirable anyway; in case memcpy is ever changed, the semantic
mismatch would be apparent while editing memmcpy.s.
|
|
this reverts the commit f29fea00b5bc72d4b8abccba2bb1e312684d1fce
which was based on a bug in C99 and POSIX and did not match IEEE-754
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1515.pdf
|
|
This adds complete aarch64 target support including bigendian subarch.
Some of the long double math functions are known to be broken otherwise
interfaces should be fully functional, but at this point consider this
port experimental.
Initial work on this port was done by Sireesh Tripurari and Kevin Bortis.
|
|
This is in preparation for the aarch64 port only to have the long
double math symbols available on ld128 platforms. The implementations
should be fixed up later once we have proper tests for these functions.
Added bigendian handling for ld128 bit manipulations too.
|
|
Changed the special case handling and bit manipulation to better
match the double version.
|
|
This trivial copy-paste bug went unnoticed due to lack of testing.
No currently supported target archs are affected.
|
|
The sign bit was not cleared before checking for 0 so -0.0
was misclassified as FP_SUBNORMAL instead of FP_ZERO.
|
|
|
|
fnstsw does not wait for pending unmasked x87 floating-point exceptions
and it is the same as fstsw when all exceptions are masked which is the
only environment libc supports.
|
|
Some early x86_64 cpus (released before 2006) did not support sahf/lahf
instructions so they should be avoided (intel manual says they are only
supported if CPUID.80000001H:ECX.LAHF-SAHF[bit 0] = 1).
The workaround simplifies exp2l and expm1l because fucomip can be
used instead of the fucomp;fnstsw;sahf sequence copied from i386.
In fmodl and remainderl sahf is replaced by a simple bit test.
|
|
the idiomatic rounding of x is
n = x + toint - toint;
where toint is either 1/EPSILON (x is non-negative) or 1.5/EPSILON
(x may be negative and nearest rounding mode is assumed) and EPSILON is
according to the evaluation precision (the type of toint is not very
important, because single precision float can represent the 1/EPSILON of
ieee binary128).
in case of FLT_EVAL_METHOD!=0 this avoids a useless store to double or
float precision, and the long double code became cleaner with
1/LDBL_EPSILON instead of ifdefs for toint.
__rem_pio2f and __rem_pio2 functions slightly changed semantics:
on i386 a double-rounding is avoided so close to half-way cases may
get evaluated differently eg. as sin(pi/4-eps) instead of cos(pi/4+eps)
|
|
The old code used the rounding idiom incorrectly:
y = (double)(x + 0x1p52) - 0x1p52;
the cast is useless if FLT_EVAL_METHOD==0 and causes a second rounding
if FLT_EVAL_METHOD==2 which can give incorrect result in nearest rounding
mode, so the correct idiom is to add/sub a power-of-2 according to the
characteristics of double_t.
This did not cause actual bug because only i386 is affected where rint
is implemented in asm.
Other rounding functions use a similar idiom, but they give correct
results because they only rely on getting a neighboring integer result
and the rounding direction is fixed up separately independently of the
current rounding mode. However they should be fixed to use the idiom
correctly too.
|
|
previously the external definitions of these functions were omitted on
archs where long double is the same as double, since the code paths in
the math.h macros which would call them are unreachable. however, even
if they are unreachable, the definitions are still mandatory. omitting
them is invalid C, and in the case of a non-optimizing compiler, will
result in a link error.
|
|
This was not caught earlier because gcc incorrectly generates quiet
relational operators that never raise exceptions.
|
|
the previous commit was a no op in exp10l because LDBL_* macros
were implicitly 0 (the preprocessor does not warn about undefined
symbols).
|
|
__polevll, __p1evll and exp10l were provided on archs when long double
is the same as double. The first two were completely unused and exp10l
can be a wrapper around exp10.
|
|
modfl and sincosl were passing long double* instead of double*
to the wrapped double precision functions (on archs where long
double and double have the same size).
This is fixed now by using temporaries (this is not optimized
to a single branch so the generated code is a bit bigger).
Found by Morten Welinder.
|
|
|
|
|
|
weak_alias was only in the c code, so drem was missing on platforms
where remainder is implemented in asm.
|
|
this makes the prototypes in math.h are visible so they are checked agaist
the function definitions
|
|
- remove the HAVE_EFFICIENT_IRINT case: fn is an exact integer, so
it can be converted to int32_t a bit more efficiently than with a
cast (the rounding mode change can be avoided), but musl does not
support this case on any arch.
- __rem_pio2: use double_t where possible
- __rem_pio2f: use less assignments to avoid stores on i386
- use unsigned int bit manipulation (and union instead of macros)
- use hexfloat literals instead of named constants
|
|
|
|
* simplify sin_pi(x) (don't care about inexact here, the result is
inexact anyway, and x is not so small to underflow)
* in lgammal add the previously removed special case for x==1 and
x==2 (to fix the sign of zero in downward rounding mode)
* only define lgammal on supported long double platforms
* change tgamma so the generated code is a bit smaller
|
|
The log, log2 and log10 functions share a lot of code and to a lesser
extent log1p too. A small part of the code was kept separately in
__log1p.h, but since it did not capture much of the common code and
it was inlined anyway, it did not solve the issue properly. Now the
log functions have significant code duplication, which may be resolved
later, until then they need to be modified together.
logl, log10l, log2l, log1pl:
* Fix the sign when the return value should be -inf.
* Remove the volatile hack from log10l (seems unnecessary)
log1p, log1pf:
* Change the handling of small inputs: only |x|<2^-53 is special
(then it is enough to return x with the usual subnormal handling)
this fixes the sign of log1p(0) in downward rounding.
* Do not handle the k==0 case specially (other than skipping the
elaborate argument reduction)
* Do not handle 1+x close to power-of-two specially (this code was
used rarely, did not give much speed up and the precision wasn't
better than the general)
* Fix the correction term formula (c=1-(u-x) was used incorrectly
when x<1 but (double)(x+1)==2, this was not a critical issue)
* Use the exact same method for calculating log(1+f) as in log
(except in log1p the c correction term is added to the result).
log, logf, log10, log10f, log2, log2f:
* Use double_t and float_t consistently.
* Now the first part of log10 and log2 is identical to log (until the
return statement, hopefully this makes maintainence easier).
* Most special case formulas were removed (close to power-of-two and
k==0 cases), they increase the code size without providing precision
or performance benefits (and obfuscate the code).
Only x==1 is handled specially so in downward rounding mode the
sign of zero is correct (the general formula happens to give -0).
* For x==0 instead of -1/0.0 or -two54/0.0, return -1/(x*x) to force
raising the exception at runtime.
* Arg reduction code is changed (slightly simplified)
* The thresholds for arg reduction to [sqrt(2)/2,sqrt(2)] are now
consistently the [0x3fe6a09e00000000,0x3ff6a09dffffffff] and the
[0x3f3504f3,0x3fb504f2] intervals for double and float reductions
respectively (the exact threshold values are not critical)
* Remove the obsolete comment for the FLT_EVAL_METHOD!=0 case in log2f
(The same code is used for all eval methods now, on i386 slightly
simpler code could be used, but we have asm there anyway)
all:
* Fix signed int arithmetics (using unsigned for bitmanipulation)
* Fix various comments
|
|
the issue is described in commits 1e5eb73545ca6cfe8b918798835aaf6e07af5beb
and ffd8ac2dd50f99c3c83d7d9d845df9874ec3e7d5
|
|
this makes acosh slightly more precise around 1.0 on i386
|
|
|
|
erfl had some superflous code left around after the last erf cleanup.
the issue was reported by Alexander Monakov
|
|
the issue was reported by Alexander Monakov
|
|
the underlying problem was not incorrect sign extension (fixed in the
previous commit to this file by nsz) but that code that treats "long"
as 32-bit was copied blindly from i386 to x86_64.
now lrintl is identical to llrintl on x86_64, as it should be.
|
|
|
|
gcc did not always drop excess precision according to c99 at assignments
before version 4.5 even if -std=c99 was requested which caused badly
broken mathematical functions on i386 when FLT_EVAL_METHOD!=0
but STRICT_ASSIGN was not used consistently and it is worked around for
old compilers with -ffloat-store so it is no longer needed
the new convention is to get the compiler respect c99 semantics and when
excess precision is not harmful use float_t or double_t or to specialize
code using FLT_EVAL_METHOD
|
|
apparently gnulib requires invalid long double representations
to be handled correctly in printf so we classify them according
to how the fpu treats them: bad inf is nan, bad nan is nan,
bad normal is nan and bad subnormal/zero is minimal normal
|
|
in atanh exception handling was left to the called log functions,
but the argument to those functions could underflow or overflow.
use double_t and float_t to avoid some useless stores on x86
|
|
libc.h is only for weak_alias so include it directly where it is used
|
|
acosh(x) is invalid for x<1, acoshf tried to be clever using
signed comparisions to handle all x<2 the same way, but the
formula was wrong on large negative values.
|
|
copy the fix from i386: return -1 instead of exp2l(x)-1 when x <= -65
|
|
|
