| Age | Commit message (Collapse) | Author | Lines |
|---|
|
the result of the 0xffff mask with the exit status could have bit 15
set, in which case multiplying by 0x10001 overflows 32-bit signed int.
making the multiply unsigned avoids the overflow. it also changes the
sign extension behavior of the subsequent >> operation, but the
affected bits are all unwanted anyway and all discarded by the cast to
short.
|
|
allows waiting on a pidfd, in the future it might allow retrieving the
exit status by a non-parent process, see
linux commit 3695eae5fee0605f316fbaad0b9e3de791d7dfaf
pidfd: add P_PIDFD to waitid()
|
|
a _REDIR_TIME64 macro is introduced, which the arch's alltypes.h is
expected to define, to control redirection of symbol names for
interfaces that involve time_t and derived types. this ensures that
object files will only be linked to libc interfaces matching the ABI
whose headers they were compiled against.
along with time32 compat shims, which will be introduced separately,
the redirection also makes it possible for a single libc (static or
shared) to be used with object files produced with either the old
(32-bit time_t) headers or the new ones after 64-bit time_t switchover
takes place. mixing of such object files (or shared libraries) in the
same program will also be possible, but must be done with care; ABI
between libc and a consumer of the libc interfaces is guaranteed to
match by the the symbol name redirection, but pairwise ABI between
consumers of libc that define interfaces between each other in terms
of time_t is not guaranteed to match.
this change adds a dependency on an additional "GNU C" feature to the
public headers for existing 32-bit archs, which is generally
undesirable; however, the feature is one which glibc has depended on
for a long time, and thus which any viable alternative compiler is
going to need to provide. 64-bit archs are not affected, nor will
future 32-bit archs be, regardless of whether they are "new" on the
kernel side (e.g. riscv32) or just newly-added (e.g. a new sparc or
xtensa port). the same applies to newly-added ABIs for existing
machine-level archs.
|
|
gcc -Wsign-compare warns about expanded macros that were defined in
standard headers (before gcc 4.8) which can make builds fail that
use -Werror. changed macros: WIFSIGNALED, __CPU_op_S
|
|
siginfo_t is not available from signal.h when the strict ISO C feature
profile (e.g. passing -std=c99 to gcc without defining any other
feature test macros) is used, but the type is needed to declare
waitid. using sys/wait.h (or any POSIX headers) in strict ISO C mode
is an application bug, but in the interest of compatibility, it's best
to avoid producing gratuitous errors. the simplest fix I could find is
suppressing the declaration of waitid (and also signal.h inclusion,
since it's not needed for anything else) in this case, while still
exposing everything else in sys/wait.h
|
|
mips has signal numbers up to 127 (formerly, up to 128, but the last
one never worked right and caused kernel panic when used), so 127 in
the "signal number" field of the wait status is insufficient for
determining that the process was stopped. in addition, a nonzero value
in the upper bits must be present, indicating the signal number which
caused the process to be stopped.
details on this issue can be seen in the email with message id
CAAG0J9-d4BfEhbQovFqUAJ3QoOuXScrpsY1y95PrEPxA5DWedQ@mail.gmail.com on
the linux-mips mailing list, archived at:
http://www.linux-mips.org/archives/linux-mips/2013-06/msg00552.html
and in the associated thread about fixing the mips kernel bug.
commit 4a96b948687166da26a6c327e6c6733ad2336c5c fixed the
corresponding issue in uClibc, but introduced a multiple-evaluation
issue for the WIFSTOPPED macro.
for the most part, none of these issues affected pure musl systems,
since musl has up until now (incorrectly) defined SIGRTMAX as 64 on
all archs, even mips. however, interpreting status of non-musl
programs on mips may have caused problems. with this change, the full
range of signal numbers can be made available on mips.
|
|
the arch-specific bits/alltypes.h.sh has been replaced with a generic
alltypes.h.in and minimal arch-specific bits/alltypes.h.in.
this commit is intended to have no functional changes except:
- exposing additional symbols that POSIX allows but does not require
- changing the C++ name mangling for some types
- fixing the signedness of blksize_t on powerpc (POSIX requires signed)
- fixing the limit macros for sig_atomic_t on x86_64
- making dev_t an unsigned type (ABI matching goal, and more logical)
in addition, some types that were wrongly defined with long on 32-bit
archs were changed to int, and vice versa; this change is
non-functional except for the possibility of making pointer types
mismatch, and only affects programs that were using them incorrectly,
and only at build-time, not runtime.
the following changes were made in the interest of moving
non-arch-specific types out of the alltypes system and into the
headers they're associated with, and also will tend to improve
application compatibility:
- netdb.h now includes netinet/in.h (for socklen_t and uint32_t)
- netinet/in.h now includes sys/socket.h and inttypes.h
- sys/resource.h now includes sys/time.h (for struct timeval)
- sys/wait.h now includes signal.h (for siginfo_t)
- langinfo.h now includes nl_types.h (for nl_item)
for the types in stdint.h:
- types which are of no interest to other headers were moved out of
the alltypes system.
- fast types for 8- and 64-bit are hard-coded (at least for now); only
the 16- and 32-bit ones have reason to vary by arch.
and the following types have been changed for C++ ABI purposes;
- mbstate_t now has a struct tag, __mbstate_t
- FILE's struct tag has been changed to _IO_FILE
- DIR's struct tag has been changed to __dirstream
- locale_t's struct tag has been changed to __locale_struct
- pthread_t is defined as unsigned long in C++ mode only
- fpos_t now has a struct tag, _G_fpos64_t
- fsid_t's struct tag has been changed to __fsid_t
- idtype_t has been made an enum type (also required by POSIX)
- nl_catd has been changed from long to void *
- siginfo_t's struct tag has been removed
- sigset_t's has been given a struct tag, __sigset_t
- stack_t has been given a struct tag, sigaltstack
- suseconds_t has been changed to long on 32-bit archs
- [u]intptr_t have been changed from long to int rank on 32-bit archs
- dev_t has been made unsigned
summary of tests that have been performed against these changes:
- nsz's libc-test (diff -u before and after)
- C++ ABI check symbol dump (diff -u before, after, glibc)
- grepped for __NEED, made sure types needed are still in alltypes
- built gcc 3.4.6
|
|
these flags are needed in order to be able to handle lwp id's
which the kernel returns after clone() calls for new threads
via ptrace(PTRACE_GETEVENTMSG).
fortunately, they're the same for all archs and in the reserved
namespace.
|
|
the W* namespace is not reserved, so the nonstandard ones must be
moved under extension features. also WNOHANG and WUNTRACED were
missing.
|
|
the old behavior of exposing nothing except plain ISO C can be
obtained by defining __STRICT_ANSI__ or using a compiler option (such
as -std=c99) that predefines it. the new default featureset is POSIX
with XSI plus _BSD_SOURCE. any explicit feature test macros will
inhibit the default.
installation docs have also been updated to reflect this change.
|
|
patch by Isaac Dunham. matched closely (maybe not exact) to glibc's
idea of what _BSD_SOURCE should make visible.
|
|
|
|
this is explicitly allowed by POSIX
|
|
|
|
|
