| Age | Commit message (Collapse) | Author | Lines |
|---|
|
FP_FAST_FMA can be defined if "the fma function generally executes about
as fast as, or faster than, a multiply and an add of double operands",
which can only be true if the fma call is inlined as an instruction.
gcc sets __FP_FAST_FMA if __builtin_fma is inlined as an instruction,
but that does not mean an fma call will be inlined (e.g. it is defined
with -fno-builtin-fma), other compilers (clang) don't even have such
macro, but this is the closest we can get.
(even if the libc fma implementation is a single instruction, the extern
call overhead is already too big when the macro is used to decide between
x*y+z and fma(x,y,z) so it cannot be based on libc only, defining the
macro unconditionally on targets which have fma in the base isa is also
incorrect: the compiler might not inline fma anyway.)
this solution works with gcc unless fma inlining is explicitly turned off.
|
|
commit 98c9af500125df41fdb46d7e384b00982d72493a wrongly claimed they
do not need to be valid for such usage, but the last sentence of C11
7.1.4 ΒΆ1 imposes a broad requirement that all macros specified as
integer constant expressions also need to be valid for #if.
simply write the value out explicitly. there is no value here in
pretending that the width of int will vary.
|
|
Remove non-constant aggregate initializer. (Still using long long, but
that is supported by ancient compilers without __extension__ anyway).
|
|
on archs with excess precision, the floating point constant 1e40f may
be evaluated such that it does not actually produce an infinity.
1e5000f is sufficiently large to produce an infinity for all supported
floating point formats. note that this definition of INFINITY is only
used for old or non-GNUC compilers anyway; despite being a portable,
conforming definition, it leads to erroneous warnings on many
compilers and thus using the builtin is preferred.
|
|
|
|
this is enough to produce the correct value even if the constant is
interpreted as 80-bit extended precision, which matters on archs with
excess precision (FLT_EVAL_METHOD==2) under at least some
interpretations of the C standard. the shorter representations, while
correct if converted to the nominal precision at translation time,
could produce an incorrect value at extended precision, yielding
results such as (double)DBL_MAX != DBL_MAX.
|
|
This is a change in ISO C11 annex F (F.10.11p1), comparision macros
can't round their arguments to their semantic type when the evaluation
format has wider range and precision. (ie. they must be consistent with
the builtin relational operators)
|
|
the arch-specific bits/alltypes.h.sh has been replaced with a generic
alltypes.h.in and minimal arch-specific bits/alltypes.h.in.
this commit is intended to have no functional changes except:
- exposing additional symbols that POSIX allows but does not require
- changing the C++ name mangling for some types
- fixing the signedness of blksize_t on powerpc (POSIX requires signed)
- fixing the limit macros for sig_atomic_t on x86_64
- making dev_t an unsigned type (ABI matching goal, and more logical)
in addition, some types that were wrongly defined with long on 32-bit
archs were changed to int, and vice versa; this change is
non-functional except for the possibility of making pointer types
mismatch, and only affects programs that were using them incorrectly,
and only at build-time, not runtime.
the following changes were made in the interest of moving
non-arch-specific types out of the alltypes system and into the
headers they're associated with, and also will tend to improve
application compatibility:
- netdb.h now includes netinet/in.h (for socklen_t and uint32_t)
- netinet/in.h now includes sys/socket.h and inttypes.h
- sys/resource.h now includes sys/time.h (for struct timeval)
- sys/wait.h now includes signal.h (for siginfo_t)
- langinfo.h now includes nl_types.h (for nl_item)
for the types in stdint.h:
- types which are of no interest to other headers were moved out of
the alltypes system.
- fast types for 8- and 64-bit are hard-coded (at least for now); only
the 16- and 32-bit ones have reason to vary by arch.
and the following types have been changed for C++ ABI purposes;
- mbstate_t now has a struct tag, __mbstate_t
- FILE's struct tag has been changed to _IO_FILE
- DIR's struct tag has been changed to __dirstream
- locale_t's struct tag has been changed to __locale_struct
- pthread_t is defined as unsigned long in C++ mode only
- fpos_t now has a struct tag, _G_fpos64_t
- fsid_t's struct tag has been changed to __fsid_t
- idtype_t has been made an enum type (also required by POSIX)
- nl_catd has been changed from long to void *
- siginfo_t's struct tag has been removed
- sigset_t's has been given a struct tag, __sigset_t
- stack_t has been given a struct tag, sigaltstack
- suseconds_t has been changed to long on 32-bit archs
- [u]intptr_t have been changed from long to int rank on 32-bit archs
- dev_t has been made unsigned
summary of tests that have been performed against these changes:
- nsz's libc-test (diff -u before and after)
- C++ ABI check symbol dump (diff -u before, after, glibc)
- grepped for __NEED, made sure types needed are still in alltypes
- built gcc 3.4.6
|
|
__FLOAT_BITS and __DOUBLE_BITS macros used union compound literals,
now they are changed into static inline functions. A good C compiler
generates the same code for both and the later is C++ conformant.
|
|
some programs (procps, babl) expect it, and it doesn't seem to
cause any harm to just add it.
it's small and straightforward.
since math.h also defines MAXFLOAT, we undef it in both places,
before defining it.
|
|
j0l,j1l,jnl,y0l,j1l,jnl are gnu extensions, bsd and posix do not
have them.
noone seems to use them and there is no plan to implement them any
time soon so we shouldn't declare them in math.h.
|
|
previously, everything was going through an intermediate conversion to
long double, which caused the extern __fpclassifyl function to get
invoked, preventing virtually all optimizations of these operations.
with the new code, tests on constant float or double arguments compile
to a constant 0 or 1, and tests on non-constant expressions are
efficient. I may later add support for __builtin versions on compilers
that support them.
|
|
the old behavior of exposing nothing except plain ISO C can be
obtained by defining __STRICT_ANSI__ or using a compiler option (such
as -std=c99) that predefines it. the new default featureset is POSIX
with XSI plus _BSD_SOURCE. any explicit feature test macros will
inhibit the default.
installation docs have also been updated to reflect this change.
|
|
while musl itself requires a c99 compiler, some applications insist on
being compiled with c89 compilers, and use of "inline" in the headers
was breaking them. much of this had been avoided already by just
skipping the inline keyword in pre-c99 compilers or modes, but this
new unified solution is cleaner and may/should result in better code
generation in the default gcc configuration.
|
|
|
|
this function never existed historically; since the float/double
functions it's based on are nonstandard and deprecated, there's really
no justification for its existence except that glibc has it. it can be
added back if there's ever really a need...
|
|
|
|
|
|
patch by Isaac Dunham. matched closely (maybe not exact) to glibc's
idea of what _BSD_SOURCE should make visible.
|
|
two issues: (1) the type was wrong (unsigned instead of signed int),
and (2) the value of FP_ILOGBNAN should be INT_MIN rather than INT_MAX
to match the ABI. this is also much more useful since INT_MAX
corresponds to a valid input (infinity). the standard would allow us
to set FP_ILOGB0 to -INT_MAX instead of INT_MIN, which would give us
distinct values for ilogb(0) and ilogb(NAN), but the benefit seems way
too small to justify ignoring the ABI.
note that the macro is just a "portable" (to any twos complement
system where signed and unsigned int have the same width) way to write
INT_MIN without needing limits.h. it's valid to use this method since
these macros are not required to work in #if directives.
|
|
|
|
this is a nonstandard function so it's not clear what conditions it
should satisfy. my intent is that it be fast and exact for positive
integral exponents when the result fits in the destination type, and
fast and correctly rounded for small negative integral exponents.
otherwise we aim for at most 1ulp error; it seems to differ from pow
by at most 1ulp and it's often 2-5 times faster than pow.
|
|
|
|
|
|
|
|
it's not even provided in the library at the moment, but could easily
be provided with weak aliases if desired.
|
|
|
|
long double and float bessel functions are no longer xsi extensions
|
|
|
|
thanks to the hard work of Szabolcs Nagy (nsz), identifying the best
(from correctness and license standpoint) implementations from freebsd
and openbsd and cleaning them up! musl should now fully support c99
float and long double math functions, and has near-complete complex
math support. tgmath should also work (fully on gcc-compatible
compilers, and mostly on any c99 compiler).
based largely on commit 0376d44a890fea261506f1fc63833e7a686dca19 from
nsz's libm git repo, with some additions (dummy versions of a few
missing long double complex functions, etc.) by me.
various cleanups still need to be made, including re-adding (if
they're correct) some asm functions that were dropped.
|
|
the previous version not only failed to work in c++, but also failed
to produce constant expressions, making the macros useless as
initializers for objects of static storage duration.
gcc 3.3 and later have builtins for these, which sadly seem to be the
most "portable" solution. the alternative definitions produce
exceptions (for NAN) and compiler warnings (for INFINITY) on newer
versions of gcc.
|
|
|
|
|
|
|
|
patch by Arvid Picciani (aep)
|
|
|
|
thanks to Peter Mazinger (psm) for pointing many of these issues out
and submitting a patch on which this commit is loosely based
|
|
|
