| Age | Commit message (Collapse) | Author | Lines |
|---|
|
despite documentation that makes it sound a lot different, the only
ABI-constraint difference between TLS variants II and I seems to be
that variant II stores the initial TLS segment immediately below the
thread pointer (i.e. the thread pointer points to the end of it) and
variant I stores the initial TLS segment above the thread pointer,
requiring the thread descriptor to be stored below. the actual value
stored in the thread pointer register also tends to have per-arch
random offsets applied to it for silly micro-optimization purposes.
with these changes applied, TLS should be basically working on all
supported archs except microblaze. I'm still working on getting the
necessary information and a working toolchain that can build TLS
binaries for microblaze, but in theory, static-linked programs with
TLS and dynamic-linked programs where only the main executable uses
TLS should already work on microblaze.
alignment constraints have not yet been heavily tested, so it's
possible that this code does not always align TLS segments correctly
on archs that need TLS variant I.
|
|
this is actually a rather subtle issue: do arrays decay to pointers
when used as inline asm args? gcc says yes, but currently pcc says no.
hopefully this discrepency in pcc will be fixed, but since the
behavior is not clearly defined anywhere I can find, I'm using an
explicit operation to cause the decay to occur.
|
|
this doubles the performance of the fastest syscalls on the atom I
tested it on; improvement is reportedly much more dramatic on
worst-case cpus. cannot be used for cancellable syscalls.
|
|
currently, only i386 is tested. x86_64 and arm should probably work.
the necessary relocation types for mips and microblaze have not been
added because I don't understand how they're supposed to work, and I'm
not even sure if it's defined yet on microblaze. I may be able to
reverse engineer the requirements out of gcc/binutils output.
|
|
not tested on mips and arm; they may still be broken. x86_64 should be
ok now.
|
|
the linux O_PATH mode provides the necessary semantics for both the
O_SEARCH and O_EXEC modes defined and required by POSIX 2008.
|
|
I'm not 100% sure that Linux's O_PATH meets the POSIX requirements for
O_SEARCH, but it seems very close if not perfect. and old kernels
ignore it, so O_SEARCH will still work as desired as long as the
caller has read permissions to the directory.
|
|
now public syscall.h only exposes __NR_* and SYS_* constants and the
variadic syscall function. no macros or inline functions, no
__syscall_ret or other internal details, no 16-/32-bit legacy syscall
renaming, etc. this logic has all been moved to src/internal/syscall.h
with the arch-specific parts in arch/$(ARCH)/syscall_arch.h, and the
amount of arch-specific stuff has been reduced to a minimum.
changes still need to be reviewed/double-checked. minimal testing on
i386 and mips has already been performed.
|
|
based on patch by Justin Cormack
|
|
while musl itself requires a c99 compiler, some applications insist on
being compiled with c89 compilers, and use of "inline" in the headers
was breaking them. much of this had been avoided already by just
skipping the inline keyword in pre-c99 compilers or modes, but this
new unified solution is cleaner and may/should result in better code
generation in the default gcc configuration.
|
|
this is needed to match the underlying "ABI" standards. it's not
really an ABI issue since the binary representations are the same, but
having the wrong type can lead to errors when the type arising from a
difference-of-pointers expression does not match the defined type of
ptrdiff_t. most of the problems affect C++, not C.
|
|
yet another gratuitous mips incompatibility...
|
|
the kernel wrongly expects the cmsg length field to be size_t instead
of socklen_t. in order to work around the issue, we have to impose a
length limit and copy to a local buffer. the length limit should be
more than sufficient for any real-world use; these headers are only
used for passing file descriptors and permissions between processes
over unix sockets.
|
|
on arm, the location of the saved-signal-mask flag and mask were off
by one between sigsetjmp and siglongjmp, causing incorrect behavior
restoring the signal mask. this is because the siglongjmp code assumed
an extra slot was in the non-sig jmp_buf for the flag, but arm did not
have this. now, the extra slot is removed for all archs since it was
useless.
also, arm eabi requires jmp_buf to have 8-byte alignment. we achieve
that using long long as the type rather than with non-portable gcc
attribute tags.
|
|
patch submitted by Kristian L. <email@thexception.net>
|
|
on old kernels, there's no way to detect errors; we must assume
negative syscall return values are pgrp ids. but if the F_GETOWN_EX
fcntl works, we can get a reliable answer.
|
|
this is actually rather ugly, and would get even uglier if we ever
want to support further feature test macros. at some point i may
factor the bits headers into separate files for C base, POSIX base,
and nonstandard extensions (the only distinctions that seem to matter
now) and then the logic for which to include can go in the main header
rather than being duplicated for each arch. the downside of this is
that it would result in more files having to be opened during
compilation, so as long as the ugliness does not grow, i'm inclined to
leave it alone for now.
|
|
|
|
if the compiler provides a value, use it; otherwise fallback to the
platform default (2).
|
|
otherwise this BADLY breaks if -funsigned-char is passed to gcc
|
|
fcntl values 1024 and up are universal, arch-independent. later I'll
add some of the other linux-specific ones for notify, leases, pipe
size, etc. here too.
|
|
F_* is in the reserved namespace so no feature test is needed
|
|
when the "r" (register) constraint is used to let gcc choose a
register, gcc will sometimes assign the same register that was used
for one of the other fixed-register operands, if it knows the values
are the same. one common case is multiple zero arguments to a syscall.
this horribly breaks the intended usage, which is swapping the GOT
pointer from ebx into the temp register and back to perform the
syscall.
presumably there is a way to fix this with advanced usage of register
constaints on the inline asm, but having bad memories about hellish
compatibility issues with different gcc versions, for the time being
i'm just going to hard-code specific registers to be used. this may
hurt the compiler's ability to optimize, but it will fix serious
miscompilation issues.
so far the only function i know what compiled incorrectly is
getrlimit.c, and naturally the bug only applies to shared (PIC)
builds, but it may be more extensive and may have gone undetected..
|
|
DECIMAL_DIG is not the same as LDBL_DIG
type_DIG is the maximimum number of decimal digits that can survive a
round trip from decimal to type and back to decimal.
DECIMAL_DIG is the minimum number of decimal digits required in order
for any floating point type to survive the round trip to decimal and
back, and it is generally larger than LDBL_DIG. since the exact
formula is non-trivial, and defining it larger than necessary may be
legal but wasteful, just define the right value in bits/float.h.
|
|
|
|
the old abi was intended to duplicate glibc's abi at the expense of
being ugly and slow, but it turns out glib was not even using that abi
except on non-gcc-compatible compilers (which it doesn't even support)
and was instead using an exceptions-in-c/unwind-based approach whose
abi we could not duplicate anyway without nasty dwarf2/unwind
integration.
the new abi is copied from a very old glibc abi, which seems to still
be supported/present in current glibc. it avoids all unwinding,
whether by sjlj or exceptions, and merely maintains a linked list of
cleanup functions to be called from the context of pthread_exit. i've
made some care to ensure that longjmp out of a cleanup function should
work, even though it is not required to.
this change breaks abi compatibility with programs which were using
pthread cancellation, which is unfortunate, but that's why i'm making
the change now rather than later. considering that most pthread
features have not been usable until recently anyway, i don't see it as
a major issue at this point.
|
|
|
|
it's a keyword in c++ (wtf). i'm not sure this is the cleanest
solution; it might be better to avoid ever defining __NEED_wchar_t on
c++. but in any case, this works for now.
|
|
|
|
the arm syscall abi requires 64-bit arguments to be aligned on an even
register boundary. these new macros facilitate meeting the abi
requirement without imposing significant ugliness on the code.
|
|
at the same time, make struct statfs match the traditional definition
and make it more useful, especially the fsid_t stuff.
|
|
|
|
really wchar_t should never vary, but the ARM EABI defines it as an
unsigned 32-bit int instead of a signed one, and gcc follows this
nonsense. thus, to give a conformant environment, we have to follow
(otherwise L""[0] and L'\0' would be 0U rather than 0, but the
application would be unaware due to a mismatched definition for
WCHAR_MIN and WCHAR_MAX, and Bad Things could happen with respect to
signed/unsigned comparisons, promotions, etc.).
fortunately no rules are imposed by the C standard on the relationship
between wchar_t and wint_t, and WEOF has type wint_t, so we can still
make wint_t always-signed and use -1 for WEOF.
|
|
|
|
|
|
|
|
this behavior (opening fds 0-2 for a suid program) is explicitly
allowed (but not required) by POSIX to protect badly-written suid
programs from clobbering files they later open.
this commit does add some cost in startup code, but the availability
of auxv and the security flag will be useful elsewhere in the future.
in particular auxv is needed for static-linked vdso support, which is
still waiting to be committed (sorry nik!)
|
|
if gcc decided to move this across a conditional that checks validity
of the thread register, an invalid thread-register-based read could be
performed and raise sigsegv.
|
|
some program was undefining AF_NETLINK and thereby breaking AF_ROUTE...
|
|
1. search was wrongly beginning with lib itself rather than dso head
2. inconsistent resolution of function pointers for functions in plt
|
|
|
|
first, use $LD_LIBRARY_PATH unless suid. if that fails, read path from
/etc/ld-musl-$ARCH.path and fallback to a builtin default.
|
|
some notes:
- library search path is hard coded
- x86_64 code is untested and may not work
- dlopen/dlsym is not yet implemented
- relocations in read-only memory won't work
|
|
|
|
unfortunately traditional i386 practice was to use "long" rather than
"int" for wchar_t, despite the latter being much more natural and
logical. we followed this practice, but it seems some compilers (clang
and maybe certain gcc builds or others too..?) have switched to using
int, resulting in spurious pointer type mismatches when L"..." wide
strings are used. the best solution I could find is to use the
compiler's definition of wchar_t if it exists, and otherwise fallback
to the traditional definition.
there's no point in duplicating this approach on 64-bit archs, as
their only 32-bit type is int.
|
|
this slightly cuts down on the degree musl "fights with" gcc, but more
importantly, it fixes a critical bug when gcc inlines a variadic
function and optimizes out the variadic arguments due to noticing that
they were "not used" (by __builtin_va_arg).
we leave the old code in place if __GNUC__ >= 3 is false; it seems
like it might be necessary at least for tinycc support and perhaps if
anyone ever gets around to fixing gcc 2.95.3 enough to make it work..
|
|
strictly speaking this and a few other ops should be factored into
asm.h or the file should just be renamed to asm.h, but whatever. clean
it up someday.
|
|
|
|
|
|
|
