With the exception of a fenv implementation, the port is fully featured. The port has been tested in or1ksim, the golden reference functional simulator for OpenRISC 1000. It passes all libc-test tests (except the math tests that requires a fenv implementation). The port assumes an or1k implementation that has support for atomic instructions (l.lwa/l.swa). Although it passes all the libc-test tests, the port is still in an experimental state, and has yet experienced very little 'real-world' use.
previously we detected this bug in configure and issued advice for a workaround, but this turned out not to work. since then gcc 4.9.0 has appeared in several distributions, and now 4.9.1 has been released without a fix despite this being a wrong code generation bug which is supposed to be a release-blocker, per gcc policy. since the scope of the bug seems to affect only data objects (rather than functions) whose definitions are overridable, and there are only a very small number of these in musl, I am just changing them from const to volatile for the time being. simply removing the const would be sufficient to make gcc 4.9.1 work (the non-const case was inadvertently fixed as part of another change in gcc), and this would also be sufficient with 4.9.0 if we forced -O0 on the affected files or on the whole build. however it's cleaner to just remove all the broken compiler detection and use volatile, which will ensure that they are never constant-folded. the quality of a non-broken compiler's output should not be affected except for the fact that these objects are no longer const and thus possibly add a few bytes to data/bss. this change can be reconsidered and possibly reverted at some point in the future when the broken gcc versions are no longer relevant.
if the order of object files in the static archive libc.a was not respected by the linker, the old logic could wrongly cause POSIX symbols outside of the ISO C namespace to be pulled into pure C programs. this should not happen with well-behaved linkers, but relying on the link order was a bad idea anyway. files are renamed to better reflect their contents now that they don't need names to control their order as members in the archive file.
the main motivation for this change is to remove the assumption that the tid of the main thread is also the pid of the process. (the value returned by the set_tid_address syscall was used to fill both fields despite it semantically being the tid.) this is historically and presently true on linux and unlikely to change, but it conceivably could be false on other systems that otherwise reproduce the linux syscall api/abi. only a few parts of the code were actually still using the cached pid. in a couple places (aio and synccall) it was a minor optimization to avoid a syscall. caching could be reintroduced, but lazily as part of the public getpid function rather than at program startup, if it's deemed important for performance later. in other places (cancellation and pthread_kill) the pid was completely unnecessary; the tkill syscall can be used instead of tgkill. this is actually a rather subtle issue, since tgkill is supposedly a solution to race conditions that can affect use of tkill. however, as documented in the commit message for commit 7779dbd2663269b465951189b4f43e70839bc073, tgkill does not actually solve this race; it just limits it to happening within one process rather than between processes. we use a lock that avoids the race in pthread_kill, and the use in the cancellation signal handler is self-targeted and thus not subject to tid reuse races, so both are safe regardless of which syscall (tgkill or tkill) is used.
this commit adds non-stub implementations of setlocale, duplocale, newlocale, and uselocale, along with the data structures and minimal code needed for representing the active locale on a per-thread basis and optimizing the common case where thread-local locale settings are not in use. at this point, the data structures only contain what is necessary to represent LC_CTYPE (a single flag) and LC_MESSAGES (a name for use in finding message translation files). representation for the other categories will be added later; the expectation is that a single pointer will suffice for each. for LC_CTYPE, the strings "C" and "POSIX" are treated as special; any other string is accepted and treated as "C.UTF-8". for other categories, any string is accepted after being truncated to a maximum supported length (currently 15 bytes). for LC_MESSAGES, the name is kept regardless of whether libc itself can use such a message translation locale, since applications using catgets or gettext should be able to use message locales libc is not aware of. for other categories, names which are not successfully loaded as locales (which, at present, means all names) are treated as aliases for "C". setlocale never fails. locale settings are not yet used anywhere, so this commit should have no visible effects except for the contents of the string returned by setlocale.
such separation serves multiple purposes: - by having the common path for __tls_get_addr alone in its own function with a tail call to the slow case, code generation is greatly improved. - by having __tls_get_addr in it own file, it can be replaced on a per-arch basis as needed, for optimization or ABI-specific purposes. - by removing __tls_get_addr from __init_tls.c, a few bytes of code are shaved off of static binaries (which are unlikely to use this function unless the linker messed up).
the motivation for the errno_ptr field in the thread structure, which this commit removes, was to allow the main thread's errno to keep its address when lazy thread pointer initialization was used. &errno was evaluated prior to setting up the thread pointer and stored in errno_ptr for the main thread; subsequently created threads would have errno_ptr pointing to their own errno_val in the thread structure. since lazy initialization was removed, there is no need for this extra level of indirection; __errno_location can simply return the address of the thread's errno_val directly. this does cause &errno to change, but the change happens before entry to application code, and thus is not observable.
prior to version 1.1.0, the difference between pthread_self (the public function) and __pthread_self (the internal macro or inline function) was that the former would lazily initialize the thread pointer if it was not already initialized, whereas the latter would crash in this case. since lazy initialization is no longer supported, use of pthread_self no longer makes sense; it simply generates larger, slower code.